| 1. | The geometric parameters of reinforcers are adjusted in order to accurately describe the deformation of the reinforced structure
对整体加筋壳的肋条几何参数进行了调整,较为准确地描述了加筋结构的受力变形状态。 |
| 2. | Fixed a problem that allowed morphing units in their alternate form to retain their alternate form bonuses when killed by a mana flare when activating their alternate form
修正了变形单位在变形中被魔力之焰杀死后，仍能保持变形状态的奖励的问题。 |
| 3. | The computation results show that the deformation of the dam appears in evident increment and the creep has an obvious influence on the deformation and stress of the face slab
结果表明，考虑堆石流变后的坝体沉降有明显的增加，对面板的应力变形状态有较大影响。 |
| 4. | In this paper , the large non linear fem software marc be used to calculate the 3d deformed distribution of the cold roll forming machine frame , slide seat and bolster plate
摘要以大型非线性有限元软件marc为分析工具，建立接触分析模型，对冷滚轧机床机架、滑台及垫板进行三维有限元弹性接触分析，给出机床三维变形状态的定量描述。 |
| 5. | Centrifuge model test is a technique that is widely used in the research field of civil engineering . one of its most distinct advantages is that the process of deforming and being destroyed of the soil can be observed with prototype
离心模型试验技术是目前在土木工程领域内进行科学研究竞相采用的一项新的试验技术，其优点是能在原型应力状态下研究和观察岩土工程的变形状态和破坏过程。 |
| 6. | Through theoretical analysis , experiment on site and numerical simulation , the characteristic of goal - water - gas system was analyzed during injecting water , and the mechanics properties , stress and strain state of coal and quantity of gas emission were studied
摘要通过理论分析、现场实验及数值仿真等手段，分析了注水过程中煤水瓦斯体系特征，研究了注水对煤的力学性质、应力和变形状态以及对瓦斯涌出量的影响。 |
| 7. | Owing to many unique properties of their own such as light self - weight , large flexibility and low damping , suspension cables often suffer large displacements but small strains each under normal work conditions . cables are also sensitive to dynamic loading with low frequencies such as wind loading
悬索具有质量轻、柔性大、阻尼低等特点，在正常工作情况下多处于大位移、小应变的变形状态，对低频荷载如风荷载等十分敏感。 |
| 8. | In this paper , some studying work is done centering on deformed steel fiber toughening state . analyzing the using range of the theory of steel fiber reinforcing and toughening mechanics ( composite material theory , fiber spacing theory and interfacial bond theory ) during the failure course of stress of sfrc
本文围绕异型钢纤维增韧性能做了如下研究工作：分析了钢纤维增强、增韧机理理论(复合材料理论、纤维间距理论以及界面粘结理论)在钢纤维混凝土受力变形状态下使用的范围。 |
| 9. | A space geometric non - linear static finite element analysis program about the long span plate - truss composite cable - stayed bridges is presented . not only it can be used to solve the space static analysis about the state of the dead load configuration ( geometry and internal forces ) , but also it can be used to analyze the internal forces and deformations of the whole construction course
基于以上理论，并结合斜拉桥的施工过程，编制了大跨径斜拉桥的空间几何非线性静力分析程序，既可用于斜拉桥成桥状态的空间静力分析，也可结合斜拉桥的具体施工过程，进行施工过程中的内力与变形状态的跟踪分析。 |
| 10. | In order to make a safe and economical design of a deep excavation support system , it is require to make a comprehensive and scientific analysis on the working state of the excavation support system , expecially its deformations , in this paper , a new finite element method based on the team - column theory , which takes into account the effect of release of lateral resistance force and transformation of structure model , is put forward in the light of the characteristics of a soft soil foundation
为了能够安全、经济地进行基坑支护设计，需要全面、科学地分析支护体系的工作状态，尤其是支护体系的变形状态。针对软土地基的特性，本文提出了考虑土体抗力释放与结构模型随施工过程改变的新杆系有限元法，并编制了求解支护结构内力与变形的计算程序。 |
