| 1. | Parallel wiring quad current for a 2 - pin tube
保证开机后启动电流峰值与撞击数据测量 |
| 2. | Now you can try to test the download speed . after reboot your system
重新开机后试试上网测试下载速率吧 |
| 3. | Please select english as the language for the following process
从新开机后,请选择以英文作为设定语言,并继续以下程序 |
| 4. | Once device is started , shut down as less as possible to ensure enough circulatory time
一旦开机后尽量少停机，以保证足够长的循环时间。 |
| 5. | 3 - stage indicator to show remaining battery power , automatically started at power on
设有3级电池状态指示以显示剩馀电量，开机后即自动启动 |
| 6. | However , removing and reloading modules after initial boot will affect this order
但是，在开机后移除或重新载入模组将会影响这份列表的顺序。 |
| 7. | Power on - off , can run step by step function to display 32bit address bus and data bus value
4 .免重覆开关机,开机后32bit address bus and data bus即能一步一步的显示 |
| 8. | Numerical - controlled lathes must go to reference position when it starts to work
摘要根据数控系统的设计原理，数控机床每次开机后都必须先回参考点，才能进行相应的操作。 |
| 9. | Use handset ( move near to earphone ) in normal position . after startup , do not touch antenna without reason
在正常人位置下使用手机（靠近耳机） 。手机开机后，不要无故触摸天线。 |
| 10. | After rebooting and interrupting the boot process during the countdown , you must first configure the network either with a static address
在重新开机并在倒数计时的时候中断开机后，您必须设定静态网路 |
