| 1. | Quasi elastic vibration
准弹性振动 |
| 2. | The study of elastic vibration responses for the ac asynchronous motor - elastic linkage mechanism
弹性连杆机构弹性振动响应的研究 |
| 3. | Vibration prediction of power transmission device based on elastic vibration of crankshaft
基于曲轴弹性振动的动力传动装置振动预测 |
| 4. | Magnetoelastic vibration analysis of a simply supported cylindrical shell in constant magnetic field
恒定磁场中简支圆柱壳的磁弹性振动分析 |
| 5. | To validate the proposed method above , a comparison is taken between the theoretical and the experimental data
在计算中考虑了弹性振动模态与流场的相互作用。 |
| 6. | It comes to a conclusion that the combined parabola acceleration is the optimum one to limit dynamic tension and elastic vibration of large belt conveyors during starting
提出了采用抛物线组合加速度控制曲线起动是限制大型带式输送机动张力和弹性振动的最佳方案。 |
| 7. | The simulation results show that the proposed control scheme not only has a good result of vibration reducing but also can lead to very high tracking precision , real time performance and robustness
仿真研究表明，采用该控制方案的柔性臂系统能有效抑制弹性振动，并具有较高的跟踪精度和较强的实时性、鲁棒性。 |
| 8. | With the development of modern mechanical industry , fatigue destruction and precision decrease due to elastic vibration occur much frequently because machine operation speeds became faster and faster and the parts of machines are designed lighter and lighter
随着现代机械工业的发展，高速轻量化设计在工程中已被广泛应用，随之而来的机构弹性振动，疲劳破坏时有发生。 |
| 9. | The magneto - elastic motion equation and the electrodynamic equation of the thin strip conductive plate in a leaning magnetic field are derived on the basis of the principle magneto - elastic theory , and the characteristic equations of the vibration of the plate supported along two long sides are obtained as well
摘要以磁弹性基本假设为出发点，给出了倾斜磁场中无限长条形薄板的磁弹性运动方程及电动力学方程，并推得了两长边简支薄板的磁弹性振动特征方程式。 |
| 10. | Oscillator mechanism with four - eccentric axes is widely used in modem continuous casting machine . with the increase of operation speeds of the machine , elastic vibrations of the machine parts became much obviously . in order to design the machine reasonably , the complex dynamic property of the system must be studied deeply
结晶器四偏心式振动机构是大型连铸机上广泛采用的一种振动装置，随着拉速的提高，其弹性振动效应非常明显，对其复杂弹性动力学性能进行深入研究是合理设计该系统的基础。 |
