| 1. | During fabrication slots for the stringers flanges were flame cut into box girders .
制造时，为安装纵梁翼缘，在箱型梁中用焰割法开槽口。 |
| 2. | The notch or the projecting piece used in such a joint
接榫在这种连接中所用的槽口或凸起物 |
| 3. | Insulator spindles for telecommunication overhead - lines ; notches
通信架空线路用绝缘子心轴.槽口 |
| 4. | Horology . closing notches for watch frames with screwed bottom
钟表业.带螺纹底板的表架关闭槽口 |
| 5. | Locks - mortice locks - part 1 : mortice locks for rebated doors
锁.榫接锁.第1部分:槽口门用榫接锁 |
| 6. | Groove cutters for woodworking machines
木工机床用切槽口刀 |
| 7. | A joint between two pieces of building material formed by a notch and a fitted projection
啮合扣两块建筑材料之间的连接，由一个槽口和一个与之相称的凸起物构成 |
| 8. | Resolution increases as the slit width or fiber diameter decreases , but at the expense of signal strength
分辨率随着过滤器直径或槽口宽度的下降而增加，但以减少信号强度为代价。 |
| 9. | Destructive tests on welds in metallic materials - impact tests - test specimen location , notch orientation and examination
金属材料焊接的破坏试验.冲击试验.试样定位槽口取向和检验 |
| 10. | He probably got as much pleasure out of the sounds the key made he did those few times when the key actually found its way into the slot
他从钥匙声中得到的乐趣大概跟他偶尔把钥匙成功地塞进槽口而获得的乐趣一样多 |
