| 1. | Renders the vertices as a list of isolated straight line segments 将顶点呈现为一系列独立的直线段。 |
| 2. | Calculation of internal forces of circle - arc beam with linear part under the action of vertical loads 任意垂直荷载作用下带直线段水平圆弧梁的内力计算 |
| 3. | Property to track left mouse clicks and draw a series of straight line segments in response to user input 属性跟踪鼠标左键单击,并绘制一系列直线段作为对用户输入的响应。 |
| 4. | Each additional point specifies the endpoint of a line segment whose starting point is the endpoint of the previous line 其他的每个点指定以前一直线段终结点为起始点的直线段的终结点。 |
| 5. | In all simulations , it was assumed the loop topology ( i . e . , single straight segment ) and gauge ( i . e . , 26awg ) is known 在各种仿真中,假定环路拓扑(如单根直线段)和规格(如26awg )是已知的。 |
| 6. | A figure has a direction that describes how line and curve segments are traced between the starting point and the ending point 图形具有方向,方向描述在起始点和终结点之间绘制直线段和曲线段的方式。 |
| 7. | Similarly , they not only can represent straight lines precisely , but also can represent quadric curve precisely , such as hyperbola and so on 该曲线与tc - b zier曲线的性质完全类似,此外它既能精确表示直线段又能精确表示双曲线。 |
| 8. | The error induced will decrease as the pile spacing increase . the correlation of error and pile spacing is discussed in this paper 以往通常将桩当作没有粗细的直线段,这样无疑会带来一定的误差,这种误差将随着与桩轴线距离的增大而逐渐减小。 |
| 9. | Install the flow measurement device in a straight run of pipe making sure that the flow arrow on the flow measurement device points in the direction of the water flow 在管道的直线段安装流量测量装置,确保流量测量装置上的箭头指向水流的流向。 |
| 10. | If there is a previous line or curve segment in the figure , a line is added to connect the endpoint of the previous segment to the starting point of the cubic curve 如果图形中已有一段直线段或曲线段,则添加一段直线连接已有线段的终结点和立方曲线的起始点。 |