| 1. | Research on technology of splitting continuous cast slab
连铸板坯切分轧制工艺的研究 |
| 2. | Ferrite rolling technology used in thin slab continuous casting and continuous rolling
薄板坯连铸连轧生产中的铁素体轧制工艺 |
| 3. | Description of ferrite rolling process in thin slab continuous casting and rolling lines
薄板连铸连轧生产线中铁素体轧制工艺描述 |
| 4. | Prime discussion on the splitting rolling of semi - continuous bar rolling line of qingdao iron and steel co
青钢半连轧棒材生产线切分轧制工艺初探 |
| 5. | It is indicated that three - roll cross wedge rolling process has a distinct advantage in the forming quality of the center of rolled pieces
分析表明，三辊楔横轧轧制工艺在轧件心部成形质量上具有明显的优势。 |
| 6. | The stable and high safety and maintaining easily network is built for providing reliable physical channel to analyze hsm rolling technology procedure . 4
建立起运行稳定、安全性强、维护方便的网络系统,为热连轧轧制工艺过程分析提供可靠的物理通路。 |
| 7. | So the effecte of frame - pack rolling technology on microstructure and mechanical proprties of spray deposited porous 5a06 and 8009 aluminum alloy sheets after rolling were studied
为此研究了外框限制轧制工艺对喷射沉积多孔材料5a06和8009铝合金板坯轧制组织和力学性能的影响。 |
| 8. | The results show that " the frame - pack rolling " technology can increase the densify , avoid cracking during rolling , and effectively improve the deformability and mechanical properties of the spray deposited porous aluminum alloy sheets
结果表明：外框限制轧制工艺提高了喷射沉积多孔材料的致密度，避免了轧制过程中裂纹的形成，有效地改善了喷射沉积板坯的轧制性能及材料的力学性能。 |
| 9. | To ensure the safe and normal operating of the machine , the actual work load has been analyzed and the malfunction causes have been rooted , and based on this , the necessary of optimizing the rolling process and optimizing solution have been presented
为保证设备的正常安全运行，对轧机现有负荷和轧制工艺进行了分析，找到引起问题的原因并在此基础上提出了轧制工艺优化的必要性和优化方案。 |
| 10. | Abstract : the effect of powder feed height on the thickness and density of powder rolled strip was calculated by using " deduction from ends of strip ” . the critical feed height ensuring uniform thickness and density of strip has been obtained . the effect of apparent density on the critical feed height is given as well
文摘:本文通过“带材尾端反推法”计算出粉末轧制工艺中粉末堆料高度对粉末轧制带材厚度、密度的影响，并得出保证带材厚度、密度均匀的临界堆料高度；同时指出了松装密度对临界堆料高度的影响。 |
