| 1. | The measurement of crack initiation in three - point bending fatigue of 40cr steel
钢疲劳裂纹萌生寿命的测量 |
| 2. | Relationship between tempering temperature and crack initiation life for 40cr steel
钢低周冲击疲劳裂纹扩展行为 |
| 3. | On crack initiation within large blocks of concrete and its drevention and control
大体积砼裂缝产生的原因及防治 |
| 4. | The fatigue crack initiation life of x60 pipeline steel after pre - tension deformation
60管线钢疲劳裂纹形成寿命的影响 |
| 5. | A simple method for determining crack initiation and propagation in the dynamic splitting test
确定动态劈裂裂纹起裂和扩展特性的简便方法 |
| 6. | Progress in study on crack initiation in epoxy resin sealing compounds at low temperature and its measures
环氧灌封料低温开裂问题及对策研究进展 |
| 7. | Testing method for crack initiation and propagation rate in steam turbine metals at elevates temperature
汽轮机.金属高温裂纹开裂和扩展速率试验方法 |
| 8. | Failure state random function method for digital simulation of turbine disc crack initiation and propagation
涡轮盘裂纹萌生扩展数字仿真的故障状态随机函数法 |
| 9. | Biaxial analysis was used to get the multiaxial information , and fatigue calculation of multiaxial crack initiation was conducted
寿命预测采用多轴裂纹萌生疲劳分析，其中部件的多轴特性通过二轴分析获得。 |
| 10. | Sem investigation shows that all the crack initiations can be traced back to the lateral sides of the sample , and the crack propagates along the direction normal to the loading axis
Zr一4合金的低周疲劳断口上，所有裂纹都起源于试样最窄处的侧表面，并逐渐向内部扩展。 |
