English translation for "inner stress"

内应力

Related Translations:

inner hemiacetal:  内半缩醛

inner condenser:  内冷凝器

inner electron:  内层电子内电子

inner block:  内层分程序

inner cabinet:  核心内阁。

inner fissure:  内壳缝, 内沟

inner photoeffect:  内光电效应

inner node:  内节点

inner slat:  分子内盐

inner gimbal:  内框架内万向悬挂支架

Example Sentences:

	1.	Inner stress ： inner stress is the stress which balances the object interior without exterior stress 内应力：内应力是在没有外力条件下平衡于物体内部的应力。
	2.	The inner stress produced by quick cooling during quenching is the basic reason of formation of quench - distortion of parts 摘要淬火过程中的快速冷却在工件内部产生的内应力是导致淬火变形的根本原因。
	3.	In order to ensure security and reliability , it ’ s necessary to monitor and evaluate the inner stress of the equipment effectively 为了保障设备运行的安全性和可靠性,人们希望对其内部的应力状况进行有效的监测和评估。
	4.	The reason why the existence of cr underlayers enhanced the pma energy of tbco films is that the existence of cr underlayers leads to forming the columnar structure and enhancing the inner stress in tbco films , thereby , enhancing the pma energy 金属cr底层增强tbco薄膜垂直磁各向异性的主要原因是：金属cr底层的存在将可以使得tbco非晶垂直磁化膜内产生柱状结构，而且会增强薄膜的内应力，从而使得其磁各向异性能增加。
	5.	The shape and distribution of inner stress of optical elements will vary in the space circumstances or other special operation conditions ， which will influence its optical characteristicdramatically . in this paper , the influence of the inertial load aroused by the large acceleration has been performed ; the effects of the varying circumstance temperature on the optical element have beenstudied preliminarily by use of finite element method 航天及其它特殊领域的工作环境，会使光学元件的形状及内部应力发生变化，进而对其光学特性产生明显的影响.本文运用有限元法，在考虑大加速度引起的惯性载荷的影响的同时，对不同环境温度下元件形状及内部应力的变化亦作了初步的研究
	6.	The conclusion of reappearing analysis is that crane bridge be used as usual because main weld maximum stress of upper cover plate of main beam lower than yield limit though it higher than permissible stress . inner stress of secondary beam was over ultimate strength , and deforming is ultra big . so it was unfit for produce and secondary beam must be changed 再现分析得出的主要结论为：桥架的主梁上盖板主焊缝的最大应力超过了许用应力，但小于屈服极限，可以继续投入使用；副梁内部的应力远远超过了强度极限，变形特别严重，不能满足生产要求，因此更换新的副梁；端梁内部的应力超过了屈服极限，小于强度极限，在应力较大的位置焊接补强板；投入使用后，要对整个桥架进行定期检查。
	7.	The productions include : 1 . the investigation of crackss of masonry structures , the characteristic and the reason on cracks of wall ; 2 . the limited element analysis about datum of brick - wall the relation between the maximal stress in wall and the relative sedimentation of foundations , the relation between the cracks form in wall and inner stress , the validity of limited element mode ; 3 . the limited element analysis about the relative sedimentation of foundations , the influence of ratio of length and height , foundations rigidity , groundsill rigidity on the inner stress in wall ; 4 . the limited element analysis about the influence of temperature on wall cracks and the influence of space between extension cracks , difference in temperature on the inner stress in wall ; 5 . the analysis about the cracks rule because of temperature , the contrast between the result and the simulant result ; 6 . the study about the influence of cracks of masonry structures because of constriction stress , the experience of dealing with constriction cracks in the domestic and the foreign ; 7 . the advice of avoiding cracks because of the asymmetric sedimentation temperature , constringency in design and construction 本研究结合实际工程中的砌块建筑普遍存在的裂缝问题，参照砖墙裂缝调查研究的成果，针对我省的砌块应用状况，进行了充分的调研，并查阅大量的文献资料，总结了砌块建筑墙体裂缝的特点和规律，通过对温度裂缝、沉降裂缝的有限元分析和经验公式的对比，深入的探讨了墙体开裂的影响因素，结合各地实际工程经验，在对混凝土砌块墙体在材料、设计、施工等方面进行系统的理论分析、综合研究的基础上，给出开裂的防治方法，促进混凝土砌块在我省的推广应用，为相关规范的编制提供理论依据和经验分析，主要研究成果有： 1砌块砌体开裂的调查研究，墙体开裂的特点和原因总结； 2有限元分析砖墙实测数据，揭示了墙体内最大主应力和地基相对沉降量的关系及墙体开裂形态与内部应力的联系，并且验证了有限元模型的有效性； 3
	8.	Abstract : a laser damage facilities , which has mm size spot and operates in tem00 mode ， were achieved . in order to know the reasons of laser damage , the laser energy density was controlled near the damage threshold of the oxide thin films . according to the examined near - threshold damage morphology , the damage mechanisms of the optical coatings can be divided into two types . one was caused by melting of the coating materials , another by exploding , induced with the inner stress of the film . the plasma generated was an important reason to expand the damage area 文摘:采用毫米量级大光斑的近单模的激光器，控制入射薄膜表面的激光能量，获得了几种常见单层膜和增透膜的损伤形貌，实验结果表明，薄膜的损伤可区分为熔化型和应力型两种，薄膜表面等离子体对损伤斑点的扩大有重要作用。
	9.	The mechanical index or parameters of rock is similar to those of other materials , they are understood and accepted easily . however geostress is one inner stress stored up in rock mass , it isn " t rock - mass " inhesion characteristics like mechanical index , but it is a mechanical state in rock masses . the stress state is generally different in similar engineering rock mass but in different space 岩石的力学性质和指标，类同其它材料的力学性质和指标，容易被人们认识和接受；而地应力是蓄存在岩体内部的一种内应力，并不是岩体的一种固有特性，而是岩体中存在的一种力学状态，同类岩体的地应力状态因地而异。
	10.	Then some methods including optimizing the spectrum and intensity of 3w1 beam line and improving the performance of pmma were put in force , and pmma structure with aspect ratio 100 was obtained under these optimum conditions . moreover , such steps as controlling ph , electrodepositing , using activator and a second cathode , and mending the power supply were taken to solve a series of problems coming into being during electroforming process correspondingly , for example , air holes , inner stress , and ununiformity of deposition 并针对3w1光源中硬x光成分较多、光强和功率密度太高的特点，提出了用ni吸收膜改善光谱和用x光暂波器法优化光强的方法，同时严格控制和改善pmma光刻胶的性能，经过反复的计算分析和实验改进后，获得了深宽比高达100的胶结构图形。

Similar Words：

"inner stone" English translation, "inner stop area" English translation, "inner storage" English translation, "inner strake" English translation, "inner strength" English translation, "inner stripper" English translation, "inner strokes" English translation, "inner structure" English translation, "inner strut" English translation, "inner sublittoral zone" English translation