| 1. | Matching box matching network
匹配箱匹配网路 |
| 2. | 3 . research pa ' s matching technology . , discuss microstrip matching network ' s design
3 .研究功放的各种匹配技术,着重讨论了微带线匹配网络的设计 |
| 3. | Deduction shows that a series inductor can be applied as the inter - stage matching network between the two stages
围绕级间匹配网络的实现这一核心问题，推导出级间匹配电路可以用一个串联电感实现。 |
| 4. | 4 . induce simulation ' s theory , as well as validating project ' s feasibility . simulate every amplifier ' s matching network by ads tool
4 .用ads仿真进行各级放大器的微带匹配网络设计和系统的优化。 |
| 5. | I . d . a . m more matches network condition during the actual construction , more satisfies practical demand . made use of i . d . a . m , an instance is calculated
改进后的方法更符合实际施工过程中网络状态的变化，更好地满足实际需要。 |
| 6. | Loading the antennae with matching networks will not only decrease the vswr at the ports of the receivers , but also reduce the influence of the mutual coupling
加载匹配网络不但能降低接收机端口的驻波比，还能有效地减弱天线之间互耦的影响，改善系统性能。 |
| 7. | The high frequency matching network mainly used lumped element lowpass network , including the series capacitance , series inductance and shunt grounded capacitance
高频匹配网络主要采取集中参数低通形式，串联部分电感、电容参加匹配，并联部分对地电容参加匹配。 |
| 8. | In this paper , the traditional cascode structure of cmos lna is considered as a two - stage amplifier and inter - stage matching network is introduced accordingly
本文也对cmos低噪声放大器进行了分析，将传统共源共栅结构看作二级放大器级联形式，并由此引入级间匹配网络。 |
| 9. | 5 . in order to keep gain smooth , enhance output power and efficiency , and reduce reflect factor and attenuation , inner matching networks are needed
5 、采用内匹配网络技术,设置输入输出匹配网络,以保持增益和传输特性的平坦性,提高输出功率和效率,降低反射系数,减少损耗。 |
| 10. | Then , lump loading is used to enhance the valid height of the antennas , as a result the input impedance of the monopole antenna undergoes gently variation with frequency , and consequently it is easy to match by wideband matching network
加载后,输入阻抗变化得到减缓,这是能够使用宽带匹配网络进行宽带匹配的前提,经过宽带匹配达到了天线小型化和宽带化的设计目的。 |
