Mobile
Log In Sign Up
Home > chinese-english > "molten aluminum" in English

English translation for "molten aluminum"

熔融铝
液态铝


Related Translations:
aluminum chlorohydrex:  丙氯铝是一种局部收敛药
anisotropic melt:  各向异性熔体
melting expansion:  熔融膨胀
fused melt:  熔炼焊剂
molten alumina:  熔融氧化铝
melting basin:  融水盆地
molten disease:  莫尔藤病,肝硬变
levitation melting:  磁力悬浮熔炼悬浮熔融法悬熔法
melt station:  溶化工段
consumably melted:  自耗电极熔炼的
Example Sentences:
1.The reaction between molten aluminum and silica glass
石英玻璃与铝液的反应
2.Molten aluminum filtered with actively coated ceramic foam filter
活性涂层泡沫陶瓷过滤铝熔体
3.Study on erosion resistance of h13 steel steam - oxidized in molten aluminum
13钢的抗铝热熔损性能研究
4.Infiltration and solidification remelting of molten aluminum in a centrifugal force field
高温铝熔液在旋转多孔介质内的渗透与瞬态固化和再熔过程
5.The effect and growth mechanism of the dopant were contrasting investigated by zno , mgo and sio2 dopants of the in - situ oxidation of molten aluminum
研究了三种铝合金原位氧化生长用引发剂zno 、 mgo 、 sio _ 2的影响作用及生长机制。
6.With the coated tih2 , the foaming process of aluminum has been researched in the laboratory . the results indicate that the weight of foamer and viscosity increaser sending to the melt aluminum , the time of agitation and holding at foaming temperature , will influence the structure as well as porosity of foam aluminum , so that the structure of foam aluminum can be adjusted by improvement technology parameter which is practical
西安理工大学工程硕士学位论文利用包覆的发泡剂在实验室对发泡工艺进行了研究,结果表明发泡剂的加入量、增粘剂的加入量、搅拌及保温时间都对制备泡沫铝的孔隙率和孔结构有明显影响,因此,通过调整工艺条件,可以调节泡沫铝的结构。
7.On this paper , a chemical deposition technique is studied to coat tih2 with al2o3 , which increase the releasing hydrogen temperature of tih2 and delay the decomposed times of tih2 in melt aluminum clearly as compared to uncoated tih2 by tested in laboratory . according to the result of test , an al2o3 - tih2
通过扫描电镜以及能谱分析证实了包覆效果,通过释氢试验对比了包覆层对tih _ 2发泡剂释氢特性的影响,优化了包覆工艺,并采用包覆的发泡剂在实验室进行了泡沫铝制备工艺实验。
8.The phase composition , microstructure and the interface characteristic were all analyzed through xrd , sem , optical microscope , eds , etc . the results are listed as follows : the growth mechanism of al - 5zn - 10si alloy is that molten aluminum keep a continuous oxidation and growth in the way of cell - shape through the micro - channels which transfer the molten aluminum to the reaction front
采用xrd 、 sem和光学显微镜以及能谱分析法,研究分析了al _ 2o _ 3 sic ni al - si合金多相陶瓷基复合材料的相组成及其界面特征。研究发现: al - 5zn - 10si合金原位氧化生长是合金熔体通过氧化体中的微观通道传输到氧化生长体前沿继续氧化,并以胞状形式向前生长。
9.Abstract : the fesiibility of ultrasonic liquid infiltratio n method in the fabrication of cf / al composite wires is discussed . composite wires with good properties are obtained by adopting proper parameters including the preheated temperature of fiber , temperature of melting aluminum , infiltrati ng time and the ultrasonic energy
文摘:探讨了超声液相浸渗法在制备碳(石墨) /铝复合丝过程中的适应性,通过选取适当的工艺参数,包括纤维去胶及预热温度、铝液温度、浸渗速度和引入的超声能量等,可以得到复合质量较好、具有较高力学性能的复合丝。
Similar Words:
"moltelmini" English translation, "molten" English translation, "molten alloy" English translation, "molten alumina" English translation, "molten aluminium" English translation, "molten antimony" English translation, "molten ash" English translation, "molten ash method" English translation, "molten bath" English translation, "molten bath arc welding" English translation