| 1. | In some structures the cracks arrested in low stress areas served to relieve the restraint condition .
在有些结构中停滞在低应力区的裂纹起着降低约束的作用。 |
| 2. | On the restraint conditions of coefficient of b - k equation of literature obsolescence and correction of half - life equation
方程系数的约束条件及半衰期公式的修正 |
| 3. | Shrinkage deformation is a driving force to stress generation and cracking in early concrete , whereas the occurrence of cracking depends on the restraint condition
摘要收缩变形是混凝土早期开裂的驱动力，然而是否会发生开裂还与约束条件密切相关。 |
| 4. | In the forming processes of mpf press and multi - step mpf , the restraint condition and deformation path of sheet metal were changed , and the forming defects were subdued , then the forming limitation was improved and large deformation could be achieved
采用多点压机及多道多点成形技术改变了约束方式及变形路迳，因而有效地抑制了成形缺陷的产生，提高板材的成形极限并实现了大变形量成形。 |
| 5. | On the basis of optimum control solution theory , the dynamic parameter discernment model of concrete gravity dam under the priori restraint conditions has been set up and a restraint variable - dimension method for finding the solutions of such model has been put forward
基于最优控制解的理论，建立了引入先验约束条件的混凝土重力坝动态参数识别模型，提出了求解该模型的约束变尺度方法。 |
| 6. | Chapter two is a main part of this essay . it analyzed the restraint conditions in the course of promoting the collective salary negotiation system and carried on the analysis in theory of the feasibility of the collective salary negotiation
第2章是本文的重点，着重分析了在推行工资集体协商过程中所面临的约束条件，并对工资集体协商在我国现有市场经济条件下的可行性进行了理论上的分析。 |
| 7. | By the use of dynamic buckling supplementary restraint conditions at the compression wave front of cylindrical shells at the instant when the buckling occurs , the critical load and dynamic buckling modes of shells were calculated from the solutions of finite element characteristic equations
计算结果揭示了圆柱壳弹性轴对称动力屈曲变形发展的机理，以及轴向应力波和屈曲变形的相互作用规律。 |
| 8. | Certainly these conclusions are not wrong but because some supposes are violated . our purpose is to find out the restraint condition to explain the economic phenomenon of china , and it can be used to direct the practice and policy making when the theory is perfect
当然这并非证明结论真正有误，而是其前提假设中有些假设被违反，我们的目的就是找出这种约束条件以解释中国的经济现象，待理论成熟后并可以指导经济实践与政策制定。 |
| 9. | Consider that it is at the still fumbling stage at present for our country to carry out the collective salary negotiation , therefore the author put key localizations at the analyzing of the restraint conditions of the collective salary negotiation and how our country constructs basic terms of
考虑到目前我国推行工资集体协商制度仍处于摸索的阶段，于是，本文把研究的重点定位在工资集体协商的约束条件分析以及我国应如何构建工资集体协商制度的基础条件上。 |
| 10. | 4 by studying mechanical optimization method , combining theory of metal cutting processing , summarize the optimization function by the cutting parameter as optimization aim and corresponding restraint condition . adopt one of optimization methods - compound shape method - to calculate cutting parameter ' s optimization result
4运用机械最优化方法，结合金属切削加工理论，推导了以切削参数为优四川大学硕i学位论文化目标的优化目标函数并确定了相应优化约束条件，采用优化方法中的复合形法实现了切削参数的最优化设计。 |
