| 1. | The welding conditions should always be neutral or slightly oxidizing .
焊接气氛必须永远保持中性或微氧化。 |
| 2. | Spot welding conditions for bared
在没有表面处理状态下的焊接状况 |
| 3. | Spot welding conditions for bared free from paint oxides etc cold rolled mild steel sheets t s 30 - 32 kgf m
公斤平方米在没有表面处理状态下的焊接状况 |
| 4. | Correlation between processing parameters of vibratory electro - slag weld conditioning and welded joint properties
振动调制电渣焊工艺参数与接头性能相关性 |
| 5. | At the same welding condition , the shift of y direction is about two times than that of z direction
焊后偏移主要是横向( y向)的影响,轴向( z向)变形较小。 |
| 6. | M1 , 1 gas metal arc welding of carbon steel m1 , group 1 , 10 through 18 gage , in the as - welded condition , with or without backing
在焊接条件下有或没有垫板10到18规格的碳钢 |
| 7. | M1 , 1 gas tungsten arc welding of carbon steel m - 1 , group 1 , 10 through 18 gage , in the as - welded condition , with or without backing
在焊接条件下有或没有垫板10到18规格的碳钢 |
| 8. | Gas metal arc welding of galvanized steel , 10 through 18 gage , in the as - welded condition , with or without backing
在焊接条件下有或没有垫板10到18规格的镀锌钢的气体保护金属极电弧焊 |
| 9. | Gas tungsten arc welding of galvanized steel , 10 through 18 gage , in the as - welded condition , with or without backing
在焊接条件下有或没有垫板10到18规格的镀锌钢的钨电极惰性气体保护焊 |
| 10. | M - 8 p - 8 gas metal arc welding of austentic stainless steel m - 8 or p - 8 10 through 18 gage , in the as - welded condition , with or without backing
在焊接条件下有或没有垫板10到18规格的奥氏体不锈钢 |
