English translation for "压力分散"
|
- pressure dispersion
pressure relief
Related Translations:
分散缩孔: dispersed shrinkage 分散鸡笼: dispersing hen coop 介电常数分散: permittivity dispersion
- Example Sentences:
| 1. | Experimental analysis of pressure - diffusing - type anchorage cable
压力分散型锚索试验分析 | | 2. | Pressure - dispersive anti - float anchor technique and its application to engineering
压力分散型抗浮锚杆技术及其工程应用 | | 3. | We carry on the basic test to different geology high slopes of an expressway , confirm limit carrying capacity of dispersed pressure , prove anchor cable for design parameter and rationality , construction of craft
我们对某高速公路不同地质高边坡进行基本试验，确定压力分散型锚索的极限承载力，验证锚索设计参数与施工工艺的合理性。 | | 4. | In the end , according to achievements from home and foreign countries in related research and those gained in the on - site test , two design methods for compression dispersion - type anchor are provided in this paper , the first one is experiential des
最后，综合国内外的相关研究成果以及现场试验成果和理论计算结果，提出了压力分散型锚索的经验设计方法和基于峰值粘结应力的设计计算方法。 | | 5. | Each unit anchor has its own individual tendon , its own unit fixed length of borehole , and is loaded with its own unit stressing jack which ensures that the load in all unit anchors is always identical . the total working load of the anchor is beard by each fixed anchor length of all units in staggered depth in the borehole and by means of respective bearing bodies , the tension loads applied to the plastic coated strands are changed into the compression loads on the grout of each fixed anchor length , then the total working load can be divided into several smaller loads and transmitted to the rock mass and soil in different locations in dispersed compression
压力分散型锚索是在一个钻孔中安装若干个锚索单元，每个单元都有自己的杆体和锚固段，在张拉时分别承受相同的工作荷载；锚索总的锚固力由分散布置于钻孔不同深度处的这些单元锚索的锚固段来共同承担，并利用各单元的承载体将无粘结锚索的拉力转化为对锚固段注浆体的压力，从而将锚索总的锚固力以压力形式分散作用于不同深度的岩土体上。 | | 6. | Compression dispersion - type anchor can be mainly classified into two categories , one of which is that , plastic coated strands in different length are respectively passed through their own bearing bodies and pre - bent as their midpoints to be t he shape of " u " , then forming several totally unbonded strand loops , i . e . unit anchor tendon . as the research object in this paper , study is performed on the anchor holding capacity , load - displacement behavior , displacement of the fixed anchor length , strain and bond stress distribution , and the removability of anchor tendon , furthermore , with the aid of analytical solution , the distribution of the bond stress is calculated and analyzed , based on the results of test and analytical solutions , design method is provided in this paper
压力分散型锚索主要有两种结构型式，本文是以将不同长度的无粘结钢绞线分别绕过不同的承载体弯曲成“ u ”形而组成各个单元锚索体这种型式为研究对象，对其承载力、荷载位移特性、锚固段位移特征、应变与粘结应力分布特征以及锚索体的可回收性能展开研究，并借助于理论分析研究其粘结应力分布状态，然后在此基础上提出了压力分散型锚索的设计计算方法。 |
- Similar Words：
- "压力分量" English translation, "压力分配" English translation, "压力分配阀" English translation, "压力分配控制板" English translation, "压力分配器" English translation, "压力封闭" English translation, "压力封盖" English translation, "压力封口" English translation, "压力封口机" English translation, "压力峰值" English translation
|
|
|
