English translation for "四端网络"

corrective quadripole
electrical quadripole
four pole network
four terminal network
fourpole
four-pole network
four-port network
four-terminal network
fournetwork
two-part network
two-port network
two-terminal pair network

Example Sentences:

	1.	The infexence of passive 4 - pin network basic equation 无源四端网络基本方程的推导
	2.	The auto - measuring system for weak current of organic polymer light - emitting diode 级微波四端网络的噪声参数计算
	3.	Linear four terminal network 线性四端网络
	4.	T - network t 形四端网络
	5.	By means of acoustic transmission matrix , the muffler is being simulated directly and indirectly . the foul - terminal network parameter , tl and il are calculated , too 利用声传递矩阵的理论对两种类型消声器进行了直接模拟和间接模拟，计算出了消声器的四端网络参数、插入损失和传递损失。
	6.	Based on equivalent four - terminal networks of the longitudinal ultrasonic transformer , the resonant frequency equation and the amplitude magnification coefficient , with reactive load , are studied 摘要在负载为纯力抗的状况下，利用纵振型变幅杆等效四端网络，对频率方程和放大系数进行了研究。
	7.	The power - electrical impedance equivalent circuit of each separate module is analyzed and more concise designing rule is educed from it by connecting corresponding four - terminal network in series and taking the material and section area of the separate module as variable 本文分析了各分离组件的力电阻抗等效电路，并将对应的四端网络相互串联，以分离组件的材料和截面积为变量，经过分析得出具有分离组件的振动件不管材料是滞相同，设计时均可将多个分离口组件看为一个体的设计规律。
	8.	Based on the transfer - matrix method , the general expressions of equivalent four - terminal network parameters of varying section torsional horn are derived , the relations between frequency equation and both the rotational velocity amplification and that of the surface tangential velocity of stepped type torsional ultrasonic horn with transitional section of cosine - like type are obtained 摘要基于传递矩阵算法，推导出了变截面杆扭转振动时等效四端网络参量的一般表达式，研究了带类余弦过渡段阶梯形变幅杆扭转振动频率方程与角速度放大倍数及外表面切向速度放大倍数等的关系。
	9.	This paper describes a reconstructive algorithm which is based on network theory for electrical capacitance tomography technic . there are twelve electrodes in the system . the permittivity distribution of flow with two components within a pipeline is reconstructed . assume the permittivity distribution of the region to be reconstructed . then whole measured area is discretized into a network composed of capacitance . the measurement circuit which contains a pair of source electrode and detecting electrode is taken as a four - terminal network . the across admittance of the four - teminal network is proportional to the capacitance between the source electrode and the detecting electrode . modify the distribution of the permittivity according to the difference between the calculated capacitance and measured capacitance . the experimental results show that this algorithm is effective and can coverge 本文描述了一种用于两种成份的流体成像的12电极电容层析成像新方法.该方法基于电路的网络理论，首先对重建区域假定一个介电率分布，用电容网络作为离散化模型，将每一个源电极和探测电极对组成的测量电路看作一个四端网络，该四端网络的跨导与源电极和探测电极之间的电容值是线性关系，这个电容值和测量得到的电容值之间存在误差，根据这个误差对修正介电率分布.通过对不同介质分布作的模拟实验结果，证实了该算法是有效的，收敛的

Similar Words：

"四端环行器" English translation, "四端级际网络" English translation, "四端口加速结构" English translation, "四端器件" English translation, "四端网路" English translation, "四端网络 双偶极" English translation, "四端网络, 四端电路" English translation, "四端网络参量" English translation, "四端网络测量器" English translation, "四端网络常数" English translation