| 1. | Design of main control unit of mine - used assembled switch
矿用组合开关主控单元的设计 |
| 2. | Mcu based collar machine controller is introduced in this article , including its hardware structure , software functions and the implementation
摘要以mcu作为主控单元，设计了全自动织领机控制器，介绍了其硬件结构、软件功能。 |
| 3. | A mcu based collar machine controller is introduced in this article , including its hardware structure , software functions and the implementation
摘要以mcu作为主控单元，设计了全自动织领机控制器，介绍了其硬件结构、软件功能。 |
| 4. | I have designed a device with the master chip of 80c196kc single chip micro - controller and the main design includes system hardware and software
具体进行了主控单元设计、前向数据采集通道、串行通信接口、温度传感器接口和人机对话接口的设计。 |
| 5. | The steering control electronics of the satss uses an 80c196kc microcontroller , a sa8282 spwm generator , and a 19 - bit resolver digital converter ( rdc )
系统的主控单元为intel80c196kc单片机，采用sa8282spwm波形发生器和19位精度的rdc轴角/数字编码器。 |
| 6. | On the basis of analyzing the control process completely , the thesis designs yaw control system for wtgs using 89c51 single - chip computer as a main control unit
在详细分析偏航控制系统控制要求的基础上，采用单片机89c51作为主控单元，设计了风电机组的偏航控制系统。 |
| 7. | The main work and new ideas in the research are : 1 . according to the environment and function of these two , at89c52 acts as the main controlling unit , so the hardware design in the patrolling point and the portable instrument is carried
本研究的主要工作和创新点有： 1 、根据巡检点和巡检仪所应用的环境和起到的作用，选用at89c52作为二者的主控单元，对巡检点和巡检仪的硬件进行了设计。 |
| 8. | In this control system personnel computer ( pc ) works cooperatively with single chip micyoco ( scm ) , which integrated the well interactive ability of pc with the field working ability of scm . the scm communicating with pc via ( com ) port
对主控单元的选择，系统采用的是pc机和单片机协同工作的方式，综合了单片机强的现场工作能力和pc机良好的交互能力，单片机和pc机通过com口来进行信息交换。 |
| 9. | Finally , the control part of the tightening machine is introduced . the closed loop control is applied in the whole of control part and the control precision can be improved . the principle diagrams of the main circuit and the program flow diagram of the main control system are given
最后，对拧紧机的控制部分进行了介绍，整个控制部分采用闭环控制，提高了控制精度，文中还给出了主要电路部分的原理图和主控单元的软件流程图。 |
| 10. | During the design of interface circuit , electromagnetic valve driving circuit and main electronic control unit , standardization and modularization technology are used . meanwhile , in view of the characteristics of hardware and diesel engine , modern software engineering technologies are employed to deploy the system resources rationally in the process of developing software
论文中采用标准化设计和功能模块单独设计的技术进行接口电路、电磁阀驱动电路和主控单元的设计；应用现代软件工程技术，合理配置软件资源，结合硬件和柴油机本身的特点进行软件开发。 |
