| 1. | Application and development on showing signalling of multi - positions
多点位置信号显示装置的研制与应用 |
| 2. | Position signal code
位置信号码 |
| 3. | Simultaneously , rotor speed can be calculated indirectly by using the position signals
同时，利用转子的位置信号，还可以间接地计算出转速。 |
| 4. | It has made experiment detection and rectification with signal control technology for the position signal error
利用数字控制技术对位置信号误差角进行了实验检测及校正。 |
| 5. | It could be accomplished sowing work prescribing by the application maps based on the gps signal under the control of mechanical variable speed unit
该播种机由变量控制器控制机械式无级变速器，根据gps的位置信号，完成处方图设计的播种施肥作业。 |
| 6. | At the same time , we can get the speed value of motor by differential computing the position value , so it is possible to accurately control the speed of motor
同时对转子精确位置信号进行微分计算又可以获得精确的速度信号，故实现精确速度闭环又成为了可能。 |
| 7. | The inverter drive signals are synchronized with the position sensor output signals so that synchronism between the stator winding currents and the rotor flux is ensured for any speed
逆变器的驱动信号与转子位置信号同步从而保证在任意的速度下定子绕组电流与转子磁场同步。 |
| 8. | The layout and control of fingers movement are validated by examples . it can export simultaneously five - channel signals for servo - motors and control in real - time
最后，通过实例对手指运动的规划和控制进行了验证，它可以同时完成五路电机位置信号的输出，并能进行有效的实时控制。 |
| 9. | So it has momentous theoretical and practical significance for the research about the stepper motor in the control system to find an easier and more economic transducer to obtain the rotor position
因此寻找一种更加简便、经济的传感方式获取位置信号，对于步进电机在控制系统中的应用有着重要的理论与实际意义。 |
| 10. | In order to improving starting operating performance of dsem , the reason of the position signal error was analyzed , and the principle of the position signal error and the influence to torque ripple has been expounded
为了改善双凸极电机起动运行性能,本文分析了电机位置信号误差产生的原因,并阐述了位置信号误差的原理以及对转矩脉动的影响。 |
