| 1. | Pmn - pzn - pfw - pzt polynary system piezoelectric ceramics low - temperature sintering
多元系统压电陶瓷低温烧结 |
| 2. | Effect of nano - al2o3 powder additive on sintering behaviors of alumina ceramics
纳米晶添加氧化铝粉体的低温烧结研究 |
| 3. | 3 . optimize the dielectric properties of low temperature sintered microwave dielectric ceramics
(三)优化低温烧结微波介质陶瓷介电性能。 |
| 4. | Research on low temperature sintering and piezoelectric properties of pmn - pt relaxor ferroelectric ceramics
弛豫铁电陶瓷的低温烧结与压电性能 |
| 5. | Magnetic and dielectric properties of low - temperature sintered hexagonal ferrite for multi - layer chip inductor in very high frequency
甚高频片式电感用低温烧结平面六角软磁铁氧体的电磁性能 |
| 6. | Pdm is utilized to forecast the non - crystal phenomena in the sintering process and study the effect of non - crystal on the process of sintering
因此采用超化学计量uo _ ( 2 + x )坯块是实现低温烧结的必要条件。 |
| 7. | It was found that the thickness of the film can improved with adding some mucilage glue . a low temperature sinter can acquire a transparent sio2 film on the gold electrode
增粘剂的加入可提高一次涂膜的厚度，低温烧结可在金电极上得到表面光亮的二氧化硅玻璃薄膜，绝缘性能良好。 |
| 8. | To utility the low temperature sintering industry , some discoveries must be found in the mechanism of low temperature sintering . otherwise , the study of technology will be faced with bottleneck
要想将低温烧结工业实用化,就必须在低温烧结机理上有所发现,否则工艺的研究将面临瓶颈。 |
| 9. | We can obtain s the significance result . in this proces 1 . co _ 2z ferrites obtain the quite good performance . in use second ball grindings in the gelatin spontaneous combustion method foundation to add bi2o3 agglutinates in the low temperature sinter
在此过程中得到一些有意义的结果: 1在凝胶自燃法的基础上,采用二次球磨加bi2o3的方法可获得性能较好的低温烧结co _ 2z铁氧体。 |
| 10. | But there is a few findings in the study of low temperature sintering , which cries for more efforts putting into the mechanical study of low temperature , to find a method for technology promoting and enrich the known activation sintering theory
然而国内外在低温烧结机理方面的成果乏善可陈,这就迫切需要加大对低温烧结机理研究的力度,为工艺提升找到一条路,并且丰富已知的活化烧结理论。 |
