Chinese translation for "单向扫描"
|
- simple scanning
simplex scan single sweep scan
Related Translations:
单向偏差: unilateral deviation 高单向: main flow during the peak period 单向捻: unidirectional twist 单向引擎: non-reversible engine 单向传输: on-going supportone way transmissionone-way transmissionsimplex transmission,simplex trafficunidirectional transmission 单向缺失: unidirectional deletion 单向门: baffle gatesingle action doorunilateral gate
- Example Sentences:
| 1. | The main results show that : ( 1 ) the mechanism of laser bending is very different from that in bending with hard tools . ( 2 ) the bending angle is varied along scanning direction , and there is a deformation wave in the process . ( 3 ) the effects of sheet length on bending can be neglected while the length is more than 10 times of thickness . ( 4 ) the sheet width has much higher influence on the bending process 分析发现:激光弯曲成形时板料的应力状态与机械折弯时有根本不同;当激光束沿直线单向扫描时,板料两端的弯曲角度不同;板料的长度大于10倍板厚或5倍光斑尺寸时,板长对弯曲角度的影响不再显著;沿扫描方向,距离光斑中心3倍光斑尺寸以外的区域,仍然对弯曲变形量产生影响。 | | 2. | The simulation results suggest that , at the end of the scanning line , the dissymmetric temperature field and the great temperature gradient result in the balling phenomenon and great thermal stress , which could lead to the destruction of the sintering samples in this region . because of the coupling effect between scanning lines , the balling phenomenon is increased as the increase of the scanning lines , thus the over short scanning lines should be avoided in the sintering process . different scanning strategies have significant influence on the sintering 模拟结果表明,扫描端点温度场的不对称及较大的温度梯度造成了端点球化现象,并在端点处产生较大的热应力,使烧结成形试样易在此处破坏;激光扫描线间的耦合作用使端点球化现象随扫描线的增加而逐渐显著,烧结时应避免过短的扫描线;不同扫描策略对烧结成形有很大影响,交替扫描会影响烧结试样的质量,实际制造时应采用单向扫描策略。 |
- Similar Words:
- "单向绕组" Chinese translation, "单向入口" Chinese translation, "单向软件方式为流程控制" Chinese translation, "单向散列函数" Chinese translation, "单向散列算法" Chinese translation, "单向扫描技术" Chinese translation, "单向扫描器件" Chinese translation, "单向色谱" Chinese translation, "单向色谱法" Chinese translation, "单向色谱图" Chinese translation
|
|
|