Chinese translation for "平均压"

mean pressure

Example Sentences:

	1.	Average compressive stress 平均压应力
	2.	The prediction of the mean crushing load agrees well with the experimental data 计算结果表明新的平均压溃载荷计算公式能够更好地拟合实验结果。
	3.	Long - term oxygen cure can make pulmonary artery is pressed on average drop apparently , the pulmonary artery when research discovers oxygen cure can make acute anoxic is pressed drop 20 % , chronic and anoxic nowadays falls 18 % 长期氧疗可使肺动脉平均压明显下降，有研究发现氧疗能使急性缺氧时肺动脉压下降20 % ，慢性缺氧时下降18 % 。
	4.	Oscillometric method is the advanced method for the no invasion blood pressure measurement . it qualitatively provides the order of the pulse pressure signal ' s changing with the cuff pressure and quantificationally points out the relationship between the mean blood pressure value and the pulse wave signal . so this method gives us a more scientific way to find other blood pressure parameters 测振法( oscillometricmethod )是无创血压测量中先进的检测方法，它定性地揭示了脉动压力信号随袖带压力变化的规律，并给出了平均压与脉搏波信号的定量关系，为血压参数进一步确定提供了一条更为科学的方法。
	5.	Conclusions as following have got through test study : ( 1 ) when impact compaction technology is applied to treat collapsible loess subgrade , the effect depth may be treated generally can not override 80 cm and impact compaction pass is optimum at 30 times . ( 2 ) for stratified impact compaction of subgrade , when compactness of each level reaches codeslstandards loose laying depth of 80 cm fits 40 impact compaction pass is the optimum combination of subgrade construction . when average compactness in each level reaches codeslstandards loose laying depth of 80 cm fits 30 impact compaction pass is the optimum combination o ( 3 ) the quality control method may request impact compaction pass as the main control index and at the same time the final division settlement is less than 10 % of total settlement as large area subgrade is constructed 通过试验研究主要得出如下认识：冲击压实技术处理湿陷性黄土地基时，其有效处理深度一般不超过80cm ，冲压遍数以30遍左右为宜；对路基分层冲压，在要求土体中各点压实度均达到规范要求时，路基冲压最佳组合为虚铺厚度80cm 、冲压40遍；在只要求土体平均压实度达到规范要求时，路基冲压最佳组合为虚铺厚度80cm 、冲压30遍；大面积施工时，质量控制方法可按照在以冲压遍数作为主要控制指标的同时，要求最后10遍分计沉降量小于累计沉降量10 ；在施工单位自己购置冲击压实机情况下，与传统施工相比较，冲击压实技术是一种既能节约资金又能大量缩短工期的施工方法。

Similar Words：

"平均循环误差" Chinese translation, "平均循环系充盈压" Chinese translation, "平均寻道时间" Chinese translation, "平均寻找磁道时间" Chinese translation, "平均迅速充盈速度" Chinese translation, "平均压力" Chinese translation, "平均压力计" Chinese translation, "平均压力梯度线" Chinese translation, "平均压应力" Chinese translation, "平均亚风化层速度" Chinese translation