| 1. | Table 4. 1 for three-point bend specimens shows that the ratio of support span to specimen depth has a small but definite effect on the results .
表41的三点弯曲试样表明，支撑跨距对试样高度的比值对试验结果有微小而又确定的影响。 |
| 2. | The dynamic response of stress intensity factor of three - point bending specimen
三点弯曲试样应力强度因子的动态响应 |
| 3. | Vibration analysis method used for determining the dynamic stress intensity factor of three - point bending specimen
三点弯曲试样动应力强度因子求解的振动分析方法 |
| 4. | Analysis of dynamic response of stress intensity factor of three - point bending specimen by using finite element method
三点弯曲试样应力强度因子动态响应的有限元分析 |
| 5. | Corrosion of metals and alloys - stress corrosion testing - preparation and use of u - bend specimens
金属和合金的耐腐蚀性.应力腐蚀试验.第3部分: u型弯曲试样的制备和使用 |
| 6. | Corrosion of metals and alloys . stress corrosion testing . part 3 : preparation and use of u - bend specimens
金属和合金的腐蚀.应力腐蚀试验.第3部分: u型弯曲试样的制备和使用 |
| 7. | Table 4 . 1 for three - point bend specimens shows that the ratio of support span to specimen depth has a small but definite effect on the results
表4 1的三点弯曲试样表明，支撑跨距对试样高度的比值对试验结果有微小而又确定的影响。 |
| 8. | Laying equal stress on experiment and theory , this paper performs a research on three point bend specimens of dh40 steel with experimental means and computational method respectively
本着试验与理论并重的原则，本文分别从试验和计算两个方面研究了这两个参数，试验和计算所用的材料是dh40低合金高强度钢，试样采用三点弯曲试样。 |
| 9. | Abstract : the inertial effect of three - point bend specimens under impactloading was analyzed by using the spring - mass system model and an expression for the correction of inertial force was obtained under the condition of brittle fracture of materials
文摘:用弹簧质量模型分析了三点弯曲试样在冲击载荷作用下的惯性效应，得到了脆性断裂条件下有效载荷的修正公式。 |
