Chinese translation for "振动机构"

vibrating mechanism
vibrator unit

Related Translations:

振动:  vibrate; vibration; vibrance; vibrancy; vibra; vibes; shaking; rumble; jitter; chatter; sway; jar; see-saw; tremor; oscillate; vibro- 短语和例子简谐振动 simple harmonic vibration; 等时振动 isochronous

Example Sentences:

	1.	The method for improving performance of vibration plate is put forward after data analysis 在对所得数据进行分析比较后，对振动机构提出了改进意见。
	2.	Abstract : the nonlinear finite element dynamic simulation model for an oscillation mechanism with 4 - eccentric axis for continuous casting machine is established by means of the theory of kineto - elastodynamics 文摘:根据运动弹性动力学的理论方法，建立了连铸机四偏心式振动机构非线性有限元动力学仿真模型。
	3.	5 . the modal experiment analysis on vibration mechanism will be completed by inv306 intellectualized signal collection and process analysis system for validating the finite element analysis model 利用inv306型智能信号采集和处理分析系统对振动机构进行模态验证试验分析，以确定仿真模型和分析数据的正确性。
	4.	According to the principle of mechanical vibration , through qualitative and quantitative analysis the paper research the vibration transportation mechanisms of the rice seeding thrower , and establish mathematic models and parameter relation of the mechanism ' s locomotion 根据机械振动学原理，对水稻抛秧机的振动输送机构进行了机构学分析并建立机构运动数学模型和参数关系，对设计的振动机构有定性和定量的分析。
	5.	3 . according to the principle of the finite element method , the research establishes finite element models of the vibration transportation mechanisms , some model parameters such as the frequency and vibration type are confirmed and validated by the modal analysis , then which analyzes dynamic - state response of the model and confirms the swing distributing of the models , thereby make the design of models precise . 4 根据有限元法的理论，建立振动机构的有限元力学模型，对该力学模型进行模态分析，通过模态分析确定抛秧机振动形态和所需的频率等参数；然后此基础上再进行力学模型的稳态响应分析，研究该模态下机构的振幅分布，以确定模型设计的准确性。
	6.	Oscillator mechanism with four - eccentric axes is widely used in modem continuous casting machine . with the increase of operation speeds of the machine , elastic vibrations of the machine parts became much obviously . in order to design the machine reasonably , the complex dynamic property of the system must be studied deeply 结晶器四偏心式振动机构是大型连铸机上广泛采用的一种振动装置，随着拉速的提高，其弹性振动效应非常明显，对其复杂弹性动力学性能进行深入研究是合理设计该系统的基础。
	7.	Abstract : guiding accuracy of casting mould depends on structure and oscillation parameters , such as elastic deformation of guiding leaf - springs , play of bearings between linkages , stroke and frequency of mould oscillation , etc . . in this paper , these factors are studied by means of kinetic and dynamic analysis of oscillating mechanism 文摘:通过对连铸机结晶器振动机构的运动学和动力学分析，研究了导向板弹簧的弹性变形、连杆轴承间隙等结构参数及振幅、振动频率等运动参数对结晶器仿弧误差的影响。

Similar Words：

"振动混凝土" Chinese translation, "振动混凝土柱桩" Chinese translation, "振动活塞式取样管" Chinese translation, "振动基频" Chinese translation, "振动机" Chinese translation, "振动机械" Chinese translation, "振动机械式整流器" Chinese translation, "振动机械整流器" Chinese translation, "振动激波" Chinese translation, "振动激发" Chinese translation