| 1. | This would certainly militate against good bonding between the resin matrix and the glass .
这当然会影响树脂基体与玻璃间的良好粘结。 |
| 2. | The coupling agent presumably improves the bond between the glass surface and the resin matrix in a laminate .
偶联剂的作用是设想能改善层压板中纤维表面与树脂基体的粘结。 |
| 3. | Study on properties of tde - 85 aromatic diamine matrix and carbon fiber composites
芳香胺树脂基体及碳纤维复合材料性能 |
| 4. | In this paper the reinforced materials used in wet winding technology are briefly introduced and study progress in the wet winding technology and suitable resin matrix are also reviewed
本文简要介绍了湿法缠绕用增强材料的状况，综述了湿法缠绕用树脂基体和湿法缠绕工艺的研究进展。 |
| 5. | The paper introduces the characteristic of carbon fiber , and the influence of the carbon fiber surface quality on carbon cohesive to the resin and the applicability of the carbon fiber composite
摘要介绍了碳纤维的特点以及碳纤维表面质量对纤维与树脂基体的粘结性和碳纤维增强复合材料的使用性能的影响。 |
| 6. | Results of dsc and tga showed that thermal properties of psmn were better than ps . psmn was melt - mixed with resin mixture in which polypropylene was the main component and polypropylene - montmorillonite nanocomposites were prepared
将制备出的psmn母料与以聚丙烯( pp )为主体的树脂基体进行熔融共混，制备出聚丙烯蒙脱土纳米复合材料( ppmn ) 。 |
| 7. | The blend of aramid and fiberglass was selected as reinforcement and butyronitile modified phenolic resin was selected as precursor to make high performance reinforced friction - resistance material in relacing of asbestos
摘要针对摩阻材料无石棉化的发展趋势，以丁腈橡胶改性酚醛为树脂基体，芳纶浆粕玻纤混杂为增强体，研制出一种混杂纤维增强摩阻材料。 |
| 8. | A high strength resin basement material from synthesizing process of resin was obtained , then the appropriate additive was added into resin to promote performance of the resin , finally , a kind of high performance phenolic resin was gained
从酚醛树脂的合成工艺入手，获得高强度的树脂基体，然后通过加入适当添加剂对树脂进行改性，最终获得了高性能的酚醛树脂。 |
| 9. | The factors which effect the fsmf filler to build up strength and toughness in the resin matrix composite materials include the size and the shape of fsmf grain the glue performance on the interface of resin matrix and the grain of fsmf
同时得出fsmf颗粒与树脂基体界面上的粘结性能、 fsmf颗粒的大小和fsmf颗粒的形状等是影响fsmf填充树脂复合材料增强增韧的重要因素。 |
| 10. | In order to obtain well effect on the improve the strength and toughness , the interface on the grain and the resin matrix should have a good glue performance ; the diameter of the grain should be small and the shape component of grain patch and fiber should be suitability
要获得好的增强增韧效果，填料颗粒与树脂基体界面上应有好的粘结性能；颗粒粒径应小且填料粉体中粒状、片状和纤维状的组分应适当。 |
