| 1. | Effect of structure on a cold flow field in calciner
分解炉的结构对冷态流场影响的数值模拟 |
| 2. | Numerical simulation of cold flow character in ethylene pyrolyzing furnace
型乙烯裂解炉冷态流动特性的数值模拟 |
| 3. | Numerical research for cold flow character in the furnace of coal sootless combustion boiler
煤无烟燃烧锅炉炉内冷态流动特性的数值研究 |
| 4. | The numerical simulation of the motor cold flow field and the mixing process of various kinds of gases are performed by piso algorithm
采用piso算法模拟了冷流状态下发动机的内流场和各种气体组分的相互掺混过程。 |
| 5. | Nasb ： does the snow of lebanon forsake the rock of the open country ? or is the cold flowing water from a foreign land ever snatched away
和合本：利巴嫩的雪、从田野的磐石上岂能断绝呢。从远处流下的凉水、岂能干涸呢。 |
| 6. | Kjv ： will a man leave the snow of lebanon which cometh from the rock of the field ? or shall the cold flowing waters that come from another place be forsaken
新译本：黎巴嫩山上岩石的积雪融化过吗？从远处流下清凉的溪水干涸过吗？ |
| 7. | Adhesive that seeps from pressuresensitive stock before or after processing the finished product . this condition is caused by cold flow or clamp pressure . alternative term : adhesive ooze
中义胶从对压力敏感的纸或完成品中渗漏出来，这多半是因冷胶合或夹子压力过大所造成的。 |
| 8. | Abstract : some cold flow improvers with excellent performance for diesel fuel were selected by evaluating the cold flow improvers and investigating the receptivity of cfpp of diesel fuel to cold flow improver
文摘:通过对柴油降凝剂的筛选评价和对不同降凝剂冷滤点感受性的考察，选择出性能优良的柴油降凝剂。 |
| 9. | Based on optimizing diesel fuel components , three formulas for - 10 , - 20 , and - 35 low pour point diesel fuel containing the selected cold flow improvers were developed and were used in industrial production , thus good economic benifit was gained
在组分优化的基础上，研制出- 10号、 - 20号、 - 35号低凝柴油的调合配方，并投入工业生产，为企业创造了良好的经济效益。 |
| 10. | The result of investigation on drags of cavities under combustion condition , with different injection schemes and fuel equivalence ratio , indicates that it is smaller than it ’ s of cold flow , and decreases with increasing fuel equivalence ratio , and could be converted into the
研究发现:凹腔火焰稳定器热试阻力小于冷流阻力,并随着当量比的增加而减小,最终会表现为正推力。综合论文研究成果,提出了多凹腔燃烧室设计技术。 |
