| 1. | Superb insulation allows for excellent melting performance at high power efficiencies , consistent with long element panel life
优质的保温材料与耐用的元件一致为炉子提供了卓越的熔化性能。 |
| 2. | Dynamic measurement includes dynamic balance , power efficiency and servo load . the servo load is highly influenced by static lead lag angle
动态测量包括动态平衡，功效和舵机载荷。舵机载荷对静前沿滞角度后很敏感。 |
| 3. | In order to improve the power efficiency , it is necessary to detect the power quality sensitively , classify them accurately and clear them effectively
对电能质量进行快速的检测和准确的分类，进而进行有效的治理是提高用电效率的重要途径。 |
| 4. | A push - pull output stage was used in the circuit to extend output voltage from rail to rail and a class ab biasing is used to improve the power efficiency of the circuit
输出级采用共源结构的互补推挽输出结构，提高了输出电压的动态范围。并使用甲乙类的输出结构，提高了电路的功率效率。 |
| 5. | Polymers have had an edge over kodak - type small - molecule devices in power efficiencies because the greater electronic conductivity of the polymer layers allows lower operating voltages
与柯达型的小分子装置相比，聚合物在用电效率上见长，由于聚合物层的导电率较高，所以操作电压可以较低。 |
| 6. | The results reveal that the ocdma systems with fbgs based encoder / decoder are not only easy to plan , but also have large number of simultaneous users , high power efficiency and low bit error rate ( b er )
结果表明，基于fbg编解码器的ocdma系统具有设计简单、用户容量大、功率效率高和误码率( ber )低等方面的优点。 |
| 7. | In new system the error pa can also amplify the original signal , so the performance of whole amplifier system increases . since rf predistorters used in the new system , the linearity and power efficiency can be enhanced
该技术改变了误差通路中的信号特性，使误差放大器也输出有用信号功率，提高了整个放大系统的性能。 |
| 8. | Coded modulation technique is a way that combines coding technique with modulation technique to get coding gain in the instance of keeping the power efficiency and frequency efficiency but increasing the complexity of equipment
解决这一问题的一种有效方法是利用交织技术与编码调制相结合,以此获得在衰落信道下性能的提高。 |
| 9. | With the development of the battery - operated portable systems , it is becoming an essential common building block since the linear voltage regulator cannot be used because of its low power efficiency , especially for the development of battery - operated portable systems
尤其是基于电池供电的便携式系统的数量日益增长,开关稳压电源已经取代效率较低的线性稳压器,成为现代超大规模集成系统中不可或缺的部分。 |
| 10. | Deposition of additional thin layers of indium tin oxide and other compounds next to the electrodes altered the interaction of the thicker layers and also improved the efficiency of the injection of holes and electrons , thereby further upping the overall power efficiency of the fluorescent oled
将薄层氧化铟锡及其他化合物附置在电极旁，可以改变厚层间的交互作用，并改善电洞及电子的注入效率，因而可以进一步增加萤光oled的整体用电效率。 |
