| 1. | Sports mats - part 7 : determination of static stiffness 运动垫.第7部分:静态劲度的测定 |
| 2. | On the control to static stiffness of tower in tower crane 塔式起重机静态刚度现状与分析 |
| 3. | Sports mats - determination of static stiffness 运动垫.静态硬韧度的测定 |
| 4. | Static stiffness of the moving element suspension 运动部件悬挂静刚度 |
| 5. | Study on the static stiffness of the parallel flexure joint robot 并联柔性铰机器人的静刚度研究 |
| 6. | Sports mats - part 7 : determination of static stiffness ; german version en 12503 - 7 : 2001 运动垫.第7部分:静态硬挺度测定 |
| 7. | A finite element model for double wishbone suspension with twirl torsion bar of a 5 - axle heavy truck is established and a simulation is conducted , including the analyses on static stiffness and strength characteristics of the suspension 摘要建立了某五轴载货汽车双扭杆双横臂悬架有限元模型,对各零部件之间连接关系进行模拟,在此基础上,对模型静态刚度和强度特性进行分析。 |
| 8. | In this paper , the pressure field and static characteristic of bearings are simulated by fluent . the pressure contours of restrictors and shaft are acquired as well as the load capacity and static stiffness curves versus eccentricity ratio 本文首次应用它对轴承的压力场和静态特性进行了仿真分析,得出了气体流经小孔、多孔柱塞和全多孔质的压力变化曲线以及轴上压力沿轴向和圆周方向上的变化趋势,并给出了轴承的承载能力和静态刚度曲线。 |
| 9. | For the whole porous bearing , the data and curves are acquired , such as , the load capacity and static stiffness versus the supply pressure , permeability , thickness of the film , eccentricity ratio and the structure parameters of the bearing . what ’ s more , some disciplinary conclusions are drawn 对于全多孔质轴承,还分析计算了供气压力、渗透率、气膜厚度、偏心率以及轴承的结构参数对轴承静态性能的影响,给出了一些规律性的结论。 |
| 10. | On the basis of the finite element analysis of the press - mounting machine , to solve the modeling error of the previous modeling method , a new mixed - model method using the spring element and thin - layer solid element was introduced in this thesis . an experiment designed to test the interface static stiffness was carried out and the needed modeling datum was obtained 在对压装机进行了整体建模仿真的基础上,针对压装机整体建模存在的误差问题,本文提出了一种改进的弹簧单元和薄层实体单元混合建模的方法,并依此设计了螺栓结合面静刚度测试试验,通过试验获得了建模所需的参数。 |