| 1. | Judge casting quality according to casting surface defect
根据铸件表面缺陷来判断铸件质量 |
| 2. | Study on surface rendering of casting during solidification process
凝固过程中铸件表面绘制的研究 |
| 3. | Specification for examination of the surface texture of precision steel castings
精加工钢铸件表面结构检验规范 |
| 4. | Standard practice for investment castings , surface acceptance standards , visual examination
熔模铸件表面验收标准外观检验的标准实施规程 |
| 5. | Fast image processing technology for cast products surface defects based on machine vision
用于铸件表面缺陷机器视觉检测的快速图像处理技术 |
| 6. | Visual examination of the surface condition of investment castings - steel , nickel alloys and cobalt alloys
熔模铸件表面情况的外观检验.钢镍合金和钴合金 |
| 7. | The distribution of physical quantity of 3 - d scalar field of casting surface can be observed visually using the technique to display the 3 - d scalar field
采用该技术来显示铸件各部位在凝固过程中各时刻的三维标量场，可以直观地观察铸件表面三维标量场物理量的分布情况。 |
| 8. | In addition , imperfections like drag and gas holes were easy to turn out in the surface of epc casting for imperfect technology design , and this was verified by the actual castings
同时发现，在消失模铸件表面容易因残余泡沫而造成表面渣气孔，实际铸件的表面质量也证明了这一点。 |
| 9. | The result of those studies as follow : ( 1 ) an composite layer of definite thickness on the casting was gained by cast - sintering technique , and it has well wear - resistance . ( 2 ) the reinforcement of the composite layer is tic or vc , which was exiguous and is well distributed
同时利用干滑动摩擦磨损实验，对表面复合层的耐干滑动摩擦磨损的性能进行了研究。研究表明： ( 1 )利用铸造烧结技术可以在铸件表面获得一定厚度耐磨性能良好的表面复合层。 |
| 10. | The composite material , which is used to make muller plow of sand mill , is prepared by the method of cast - infiltration and the technology parameters for making composite material is optimized . then the effects of the matrix component on composite layer also are disccused
通过试验对利用铸渗法在铸件表面获得一定厚度复合材料层的形成机理进行了理论分析，优选了利用铸渗法在铸件表面制备复合材料的工艺参数（浇注温度、合金膏块的厚度、浇注位置等） 。 |
