| 1. | The parametric modeling of extruding taper screw rod based on apdl
的挤压膨化锥形螺杆的参数化建模 |
| 2. | Nonlinear fem analysis of rc staggered joint by using apdl language
语言实现钢筋混凝土错层节点非线性分析 |
| 3. | Apdl language based 3d parametric finite element modeling and analyzing
语言的有限元三维参数化建模与分析 |
| 4. | In chapter four , the program block of parametric fea on lpg ship hull hold is built
第四章介绍了基于apdl语言的lpg船体舱段有限元计算模块lpgfea的实现过程。 |
| 5. | Second , it eonstructs a typical bga / csp 3d model by programming the apdl code , then analyzes its life prediction
随后，通过参数化编程建立典型结构的bga csp形式封装的三维模型，对此进行了应力、应变分析，并作了寿命预测。 |
| 6. | Finally , based on the parametric method , a parametric fea modeling and post process software was developed by using apdl and visual basic language
最后,基于参数化设计的思想,利用apdl与vb语言,开发了设计非对称渐开线齿轮的计算软件。 |
| 7. | The contact finite element optimization model based on augmented lagrange method was established by ansys parametric design language ( apdl )
阐述了基于扩张的拉格朗日算法有限元分析的接触优化模型建立，利用ansys软件参数化设计语言完成了优化计算。 |
| 8. | Arbitrary lagrangian - eulerian formulation is adopted to treat the moving interface between the fluid and the structure . the coupling algorithm is programmed based on ansy5 . 6 with apdl
在ansys5 . 6的基础上，应用其参数化设计语言apdl编制程序，控制流体计算和结构计算，实现耦合系统的求解。 |
| 9. | The fea assembly model was built according to the distortion of the leaf spring in the former phase in ansys apdl . the load case was simulated with contact of loading head and leaf spring
根据装配阶段各簧片的变形情况，并利用装配阶段所建模型的参数化语言程序建立钢板弹簧总成的有限元模型。 |
| 10. | The nonlinear thermal vibration characteristic of the composite thin - cylindrical shells under linear temperature field is investigated by the ansys parametric design language ( apdl )
摘要采用有限元软件ansys参数设计语言( apdl )实现复合材料薄壁圆柱壳结构在线性分布温度场作用下的非线性热振动特性分析。 |
