Then he rapped on the door with a bit of stick like a handspike that he carried . 后来，他用随身带着的一根推杆样的棒子重重地敲门。
2.
Some of you pretty handy with a handspike - end 你手下有人棍棒舞得厉害。
3.
Then he rapped on the door with a bit of stick like a handspike that he carried , and when my father appeared , called roughly for a glass of rum 接着，他用一根自带的像铁头手杖似的木棍子重重地敲门。当我父亲出来后，他又粗声大气地要来杯郎姆酒。
4.
It is composed of two components : level move and rotation . level move is realized by the co - operation of oil vat , handspike and synchronizer . rotation is realized by the brace and the triangle oriented axis 平行移动是由液压油缸推动，通过推动轴承传到推杆、同步盘，并相互配合实现的；旋转运动是由曲柄、三角架导向轴完成的。
5.
There were the two watchmen , sure enough : red - cap on his back , as stiff as a handspike , with his arms stretched out like those of a crucifix , and his teeth showing through his open lips ; israel hands propped against the bulwarks , his chin on his chest , his hands lying open before him on the deck , his face as white , under its tan , as a tallow candle 那里赫然是两个留守的海盗。戴红帽的那个家伙四脚朝天躺在那里一动不动，着牙咧着嘴，伸着两条胳膊，像被钉在了十字架上。伊斯莱尔靠舷墙坐着，两腿笔直地伸着，下巴耷拉在胸前，双手张开平放在他面前的甲板上，棕黑色的脸已苍白如蜡。
6.
Sluice gate of double disk is controlled by electric - hydraulic handspike ; plc will compare sand temperature on outlet according to pre - designed value and inner sand temperature of double disk ; and then it adjusts close time of sluice gate , controls residence time of hot sand in double disk ; therefore , it can control sand temperature of outlet and make it reach required value . 双盘的卸砂门由电液推杆控制， plc根据预设的出口砂温与实测的双盘内砂温进行对比，而调整卸砂门的关闭时间，控制热砂在双盘内的停留时间，进而控制双盘出口砂温使其达到要求。
7.
Control of discharge - sand gate discharge - sand gate adopts electro - hydraulic handspike ; it uses displacement transducer to measure opening of sluice gate ; when opening of displacement transducer is smaller than set point , the electro - hydraulic handspike will open this gate ; when opening of displacement transducer is larger than set point , the electro - hydraulic handspike will close the gate 卸砂门采用电液推杆，由位移传感器检测砂门的开度，当位移传感器检测的开度小于控制系统的给定值时，电液推杆工作将门开大，当位移传感器检测的开度大于控制系统的给定值时，电液推杆工作将门关小。
8.
While actual profile lies on the type of cam mechanism , this paper take example for three kind of typical cam gear that is spire handspike disk cam mechanism , roller handspike disk cam mechanism and flat - bottomed handspike disk cam mechanism , and the design of cam actual profile is carried out . with the extensive application of computer and development of applied software , the computer - aided design is regarded increasingly 本文以配气凸轮机构三种典型的类型，即尖端推杆盘形凸轮机构、滚子推杆盘形凸轮机构及平底推杆盘形凸轮机构为例，进行了凸轮工作轮廓线的设计随着计算机的广泛应用及应用软件的不断发展，内燃机配气凸轮的计算机辅助设计日益受到人们的重视。
