| 1. | Perovskite - type solid electrolytes in sofc
燃料电池中的钙钛矿型固体电解质 |
| 2. | Air plasma spray forming of sofc anode layer by using charcoal mixture
阳极层的等离子喷涂混合炭粉成孔工艺 |
| 3. | Sofc is mainly composed of three parts : electrolyte , anode and cathode
Sofc材料主要包括固体电解质材料、阳极材料和阴极材料三大类。 |
| 4. | The status and progress of the anode materials for sofc are reviewed in this paper
本文综述了固体氧化物燃料电池阳极材料的研究现状和进展。 |
| 5. | The status and progress of the anode materials for sofc are reviewed in this paper
摘要本文综述了固体氧化物燃料电池阳极材料的研究现状和进展。 |
| 6. | The prime requirements for anode materials are good electrical properties , a poly - hole microstructure and compatibility with other fuel cell components
Sofc对其阳极材料的基本要求是：高的电子电导率、多孔结构及与其它组分相匹配的热膨胀系数。 |
| 7. | Solid oxide fuel cells ( sofc ) is one of the most attractive energy conversion system because of its high efficiency , low pollution and fuel flexibility
固体氧化物燃料电池( sofc )因其具有能量转换效率高、低污染、对燃料的适应范围宽而备受关注。 |
| 8. | The key point lays on the technology of fuel cell stack . on the basis of accumulation in mcfc experimentation , some technology will be more easily transplanted on sofc
燃料电池堆技术是燃料电池发电站的关键技术，在mcfc积累的运行经验能够比较容易地移植到sofc 。 |
| 9. | Ysz - ni ( nickel - yttria stabilized zirconia ) cermets have been widely used in the solid oxide fuel cells ( sofc ) and functionally gradient materials ( fgm ) areas
Ysz - ni (镍-氧化钇稳定的氧化锆)金属陶瓷可以应用于固体氧化物燃料电池( sofc )和功能梯度材料( fgm )中。 |
| 10. | Intermediate - low temperature solid oxide fuel cell ( iltsofc ) is the tendency of the solid oxide fuel cell ( sofc ) commercializing development , and one key problem is the study of cathode materials
摘要中低温固体氧化物燃料电池的研制是固体氧化物燃料电池商业化的必然趋势，阴极材料的研制是影响其发展的关键问题之一。 |
