| 1. | Water table is a surface on which the pressure is atmospheric .
潜水面是一个其表面上压力等于大气压力的面。 |
| 2. | The field is carried along with the fluid as it moves in response to the forces imposed upon it
当流体在其上压力的作用下移动时，磁场和流体一起被运移。 |
| 3. | To a certain extent pressure can really play a role of motivation that ' s helpful to push one forward
某种程度上压力的确扮演着动力的角色，能推动人前进。 |
| 4. | After all , the negative effect of pressure is far less than the positive effect of temperature
压力的增加则不利于该反应的进行。但总体上压力的消极影响远远小于温度的积极效应。 |
| 5. | Select node pressure from the browser ' s map page and observe how pressure values at the nodes become color - coded
在浏览器图页面上选择“压力节点” ，观察节点上压力值的颜色标志如何变化。 |
| 6. | 4 . an ansys - based fea model to calculate the thermal loads applying on slrcp is raised . this model can calculate the exact crack width and steel stress of slrcp
因此，采用把常规钢衬钢筋混凝上压力管道进行改性，以减小甚至避免裂缝的出现是一个很有前途的方向。 |
| 7. | - a new load equipment is invented in the model test ; 2 . the model test results indicate : slsfrcp has a better ability to control crack ; slsfsrcp has a better ability to avoid crack
模型试验表明，钢衬钢筋钢纤维混凝上压力管道限裂能力明显增强：钢衬钢筋钢纤维自应力混凝土压力管道则有优良的抗裂能力。 |
| 8. | The earth pressure curve and bending moment curve on lining versus the prop time are presented . the anchor reinforce effect in various rocks is analyzed and the reasonable support time for cracked surrounding rocks is put forward
并对支护时机与衬砌上压力、弯矩的相互关系、不同岩体锚杆的加固效果进行了分析研究，提出了破碎围岩的合理支护时机。 |
| 9. | An experimental study on the aerodynamic characteristics of new concept car is conducted by model wind tunnel test , covering the pressure coefficient and wake vortices on longitudinal symmetry plane , as well as aerodynamic forces and moments under different yaw angles
摘要用模型风洞对新概念车在不同横摆角下纵对称面上压力系数、整车气动力和气动力矩的变化以及纵对称面尾部流态分布进行了试验研究。 |
| 10. | In this paper , the pressure field and static characteristic of bearings are simulated by fluent . the pressure contours of restrictors and shaft are acquired as well as the load capacity and static stiffness curves versus eccentricity ratio
本文首次应用它对轴承的压力场和静态特性进行了仿真分析,得出了气体流经小孔、多孔柱塞和全多孔质的压力变化曲线以及轴上压力沿轴向和圆周方向上的变化趋势,并给出了轴承的承载能力和静态刚度曲线。 |
