| 1. | Studies on the stability of epoxy acrylate latex interpenetrating polymer networks
丙烯酸胶乳型互穿聚合物网络稳定性的研究 |
| 2. | Improvement on technological and mechanical properties of htpb based pu ipn by pbma
为基聚氨酯互穿聚合物网络的工艺性能与力学性能 |
| 3. | Research on preparation and crosslinking structure of semi - ipn copolymethaerylate fibers
半互穿网络共聚甲基丙烯酸酯纤维制备及其交联结构研究 |
| 4. | Synthesis and characteristics of interpenetrating network hydrogels of poly acrylamide poly - n - isopropylacrylamide
聚异丙基丙烯酰胺互穿网络水凝胶的制备与性能 |
| 5. | By the scientific designs at the molecule level , the polymer compound with interpenetrating networks structure was formed
通过分子设计，采用互穿网络聚合技术，以水为分散介质合成的水性聚氨酯树脂，具有常温自胶联功能。 |
| 6. | It has been studied that the effect of component , cross - linking agent pg and dvb and initiating agent bpo on mechanical properties of pu ( based polyether ) / ps ipns
研究了组成、交联剂pg和dvb以及引发剂bpo对基于聚醚pu用s互穿网络聚合物材料力学性能的影响。 |
| 7. | Character and development of ipn , seed emulsion polymerization and in - situ emulsion polymerization methods were compared , and it makes some brief introduction to development of multiple compound modification such as organic silicone , nanometer material
比较了互穿网络法、种子乳液法和原位乳液聚合法等的特点和进展，对多重复合改性如有机硅、纳米材料等的进展作了简介。 |
| 8. | The new methods of toughening epoxy resins , including those of doing thermoplastic resin , thermotropoic liquid crystalline polymer , core - shell latex polymer , forming interpenetrating networks polymer , in - situ polymerization , are introduced , with their mechanisms discussed herein as well
介绍了环氧树脂增韧改性的一些新方法，包括热塑性树脂增韧、互穿网络增韧、热致性液晶增韧、原位聚合增韧、核壳结构聚合物增韧等，并对其中的增韧机理作了总结分析。 |
| 9. | In this paper , interpenetrating polymer networks ( ipn ) based on polysiloxane ( pdms ) and poly ( methyl acrylate ) ( pma ) were prepared by using ma monomer and two types of pdms , which viscosities were 3300pa s and 7000pa s respectively . pdms was crosslmked by tetraethyl orthosilicate
本论文制备了聚二甲基硅氧烷与聚丙烯酸甲酯的序列半互穿聚合物网络，其中聚硅氧烷为交联结构，采用粘度分别为3300pa ? s和7000pa ? s两个品种，聚丙烯酸甲酯为线性聚合物。 |
| 10. | The result showed that the interpenetration network structure between polymeric and deposited metal has been observed under a scanning electronic microscope and optical microscope . the experiments showed that copper deposition gradient distribution and crystal structure were greatly influenced by the the ph value of electrochemical reduction medium solution and the size , number and distributing of microporous in swelling cathode film
用扫描电镜和体式显微镜对制备的pmgcf进行了分析，结果表明：制备的pmgcf样品的金属沉积层梯度分布均匀，在一定的电化学条件下金属铜和聚合物基体形成了互穿的立体网状结构。 |
