English translation for "供油压力"
|
- charge oil pressure
Related Translations:
供: 供Ⅰ名词1.(供品) offerings 短语和例子上供 offer up a sacrifice2.(口供; 供词) confession; deposition 短语和例子逼供 extort a confession; 诱供 elicit confessionⅡ动词1.(供奉) lay (offerings)2.(受审者陈述案情) confess; own up 短语和 曼供: offerings of mandārava flowers cf. below
- Example Sentences:
| 1. | In this paper , firstly , to discuss the effects caused by oiling system components under the variation of oil pressure
论文首先分析了供油装置中诸元件如何影响到供油压力的变化。 | | 2. | The contents are as followed : 1 . to make an analysis of how the components of bearing influence the stability of oil pressure
具体工作内容如下： 1分析供油系统诸元件对供油压力的影响。 | | 3. | In the test , the speed of revolution , temperature , oil supply pressure and other parameter are measured by the industry control computer
采用工业控制计算机测试转速、温度、供油压力等参数。 | | 4. | The axial forces are related to oil supply pressure , and also to the square of rotary speed and the fourth power of effective diameter of circular circle
轴向力除了与供油压力有关外，主要是与泵轮转速的二次方和循环圆有效直径的四次方有关。 | | 5. | Secondly , to research the phenomena of gas cavity in the oil recess , which was caused by the low oil pressure and to analyze its influence on the dynamic and the static characteristics of bearing
进而分析由于供油压力变化导致气穴现象发生时，对轴承动静态性能的影响。另外对紊流工况下两相流润滑对轴承动静态特性的影响作了初步探讨。 | | 6. | However , many of those studies focused on the structures of bearing itself . and few studies have been done on the gas cavity caused by the decrease of oil - pressure in the oiling system , which influences bearing
但是大多数研究都集中在轴承结构本身，对供油系统中由于供油压力变化而造成油腔中出现气穴现象对轴承特性影响的研究较少。 | | 7. | In formerly static strength tests , no attention was paid to the process of test load . according to their experiences , experimenters adjusted pressure in actuator only by hand to control the test load value and the load value was read from instruments
早期的静力试验对加载过程没有严格的要求，所以当时的液压加载方式由试验人员直接调整供油压力，改变液压缸内的油压，控制活塞杆输出的集中力载荷。 | | 8. | Taking the hydrostatic equilibrium of axial force of pump dm360 as the example , this paper elaborates design calculation and dynamic - static characteristic analysis of hydrostatic bearing with twisting plate throttle , derives design parameters and formulas of bearing structure , discusses effects of various main factors ( oil viscosity , compressibility , distortion coefficient of twisting plate , pressure of oil source , and bearing clearance ) on dynamic characteristic , and obtains some conclusions about the application of hydrostatic bearing in engineering practice
本文以dm360型泵轴向力的液体静压支承平衡为例，对扭板节流静压支承的设计计算和动静态特性分析进行了较为详尽的阐述，推导出支承结构的设计参数和公式，讨论了各种主要因素(油液的粘度、油液的可压缩性、扭板变形系数、供油压力、支承间隙)对支承动态特性的影响，给出了一些结论。 | | 9. | My paper attempts to attain some conclusions from this study of gas cavity , and these conclusions may be useful to controlling bearing operation . the oiling system is an important part of radial - thrust floating - ring hybrid bearing . there are some factors that lead to the variation of oil - pressure in the oiling system
本论文试图从理论方面研究由于供油压力变化导致气穴现象(这时候呈现两相流润滑)对径?推联合浮环动静压轴承动静态特性的影响，为以后可能寻求主动控制作了准备。 |
- Similar Words：
- "供油系" English translation, "供油系数" English translation, "供油系统" English translation, "供油箱" English translation, "供油箱充惰性气体" English translation, "供油延续时间" English translation, "供油站" English translation, "供油止回阀" English translation, "供油中断" English translation, "供油主管" English translation
|
|
|
