| 1. | Coolant temperature and ambient air pressure may be used to optimize cold starting and altitude performance .
冷却水温度和大气压力可用于使冷起动性能和高原性能最优化。 |
| 2. | It takes time for the cooling temperature to stabilize
冷却水温度安定时间长。 |
| 3. | The cooling water temperature cannot be measured accurately
冷却水温度正确测定。 |
| 4. | The microcontroller - based main engine cooling water temperature control system
船舶柴油机冷却水温度控制系统的设计 |
| 5. | The resonance frequency of the accelerating tube is synchronizing with the cooling water temperature
加速管共振周波数冷却水温度同期。 |
| 6. | In this study the revised xtt formula are used to calculate void fraction correlation in the two - phase region of condenser and evaporator
机组制冷t随着冷冻水入口温度的增加而增大，随冷却水温度的升高而降低。 |
| 7. | Elevating the temperature of the cooling water or reducing the wall temperature before water quenching can prevent walls from yielding effectively
提高冷却水温度或降低进水冷焦前塔体温度能有效防止塔体产生塑性变形。 |
| 8. | At last , the influences of the rate of energy storage , solution concentration differences and the temperature of cooling water to economic indicators are discussed
另外，本文还详细计算了蓄冷率、溶液浓度差和冷却水温度对潜能储存系统各项经济指标的影响情况。 |
| 9. | The relationships between the energy storage density , cop , the rate of crystallization and the solution concentration difference , the temperature of cooling water are also discussed in the paper
此外还分析了系统蓄能密度、 cop及结晶率随溶液浓度差和冷却水温度的变化情况。 |
| 10. | On the other hand , in the new system the heater is set up directly in front of the accelerating tube so that stable cooling water can be supplied , because temperature can be roughly uniform as the lowest portions of the unstable temperature through heating
?来冷却冷却水温度测定热交换器冷水量三方弁调节。当社加速管直前设不安定温度谷间加热安定冷却水供给可能。 |
