| 1. | The internal port geometry is thereby determined .
这样就定出了内通道的几何形状。 |
| 2. | Local deviations depend strongly on the local geometry of the solid matrix .
局部偏离严格地依赖于固体矩阵的局部几何形状。 |
| 3. | Thus the distortion in the geometry of the deformed structure will be exaggerated .
这样，变形结构中几何形状的失真将得以放大。 |
| 4. | The geometry of the vessel and its internals may limit the size of the bubbles .
容器和其内部构件的几何形状可能限制气泡的尺寸。 |
| 5. | The following remarks refer to the effects of mechanical processing on fiber surface geometry .
下面介绍机械加工对纤维表面几何形状的影响。 |
| 6. | The prestressing influence coefficients depend on the geometry of the concrete structure only .
预应力影响系数仅取决于混凝土结构的几何形状。 |
| 7. | In this geometry the erosive effect is most pronounced in the early stages of motor combustion .
对这种几何形状，在燃烧初期的侵蚀作用最为显著。 |
| 8. | The magnitude of the maximum value, as well as the time to reach such maximum value, varies with geometry and surface heat-transfer coefficient .
最大值的及达到此最大值的时间均随几何形状和表面热传导系数而变。 |
| 9. | Obviously, the crimp geometry in staple fiber brings about a spatial hindrance that works against fiber packing during the needing process .
显然，短纤维上卷曲几何形状在针刺过程中对纤维压缩密集，在空间上受到限制。 |
| 10. | Relationships between the minor axis semidiameter and major axis semidiameter have been empirically determined for different structural detail geometries .
对于不同结构细节的几何形状，已经确定了短轴和长轴半径之间的关系。 |
