English translation for "凸轮系统"

camming

Related Translations:

凸轮锁:  cam lockcamlock

脉冲凸轮:  impulse campulse cam

母凸轮:  master cam

凸轮件:  cam member

切削凸轮:  cutting cam

凸轮联轴节:  cam sleeve

凸轮型:  cam form

凸轮盒:  cam case

中心凸轮:  centering jaw

分级凸轮:  stepped cam

Example Sentences:

	1.	Dual cams are optimized for the movement and -设有双重阻力变化凸轮系统,使动作更顺
	2.	Optimized movement specific cam creates a feel -设有阻力变化凸轮系统cam ，
	3.	Hip pad , for optimal pelvic stabilization . - -设有阻力变化凸轮系统,
	4.	Range limiting device maintains integrity of -设有阻力变化凸轮系统,
	5.	Sliding cam shaft system 滑动式凸轮系统
	6.	In engineering practice , cam - follower system is used widely because of its easily achieving the special rule 在工程实际中，凸轮系统由于可以方便实现从动件给定规律而被广泛使用。
	7.	Such an expansion reduces the original problem to a set of linear algebraic equations from which the solution in the interval of one period can be obtained 无论哪种谐波平衡法，最终得到的是一组复杂的非摘要周期时变凸轮系统的动力行为研究线性代数方程组。
	8.	In this paper , dynamic response of parametrically excited flexible cam - follower system on universal condition is investigated by using the method of the expansion of the system equation based on chebyshev polynomials . the state vector and the periodic matrix of the system are expanded in terms of chebyshev polynomials over the principal period at first 为研究了凸轮和从动件之间的含间隙的凸轮系统模型的动力学响应，本文使用了两类谐波平衡法：解析谐波平衡法和dft数值谐波平衡法，对该系统模型进行简化。
	9.	The two kind of harmonic balance methods , analytical hbm and dft numerical hba , are used for the analysis of the parametrically excited flexible cam - follower system with consideration of the clearance between cam and follower . through the two methods , the system equation is reduced to a series of nonlinear algebraic equations 这种非线性代数方程组需要依靠数值计算的迭代法才能求解，而由于问题的复杂性，普通的newton法很难求解，本文采用一种广泛应用的拟newton法一一broyden方法来求解，得出了出含间隙凸轮系统模型的稳态响应。
	10.	The main contributions are as following : the dynamic modeling , the solution of the linear and nonlinear differential equations , the dynamic response of the system , and so on . on account of the influence of the model of the high - speed cam - follower system on the dynamic character , the two modelings , the modeling with consideration of the clearance between the cam and the follower and the modeling without consideration of the clearance , were been addressed firstly 本课题主要对高速凸轮机构的周期时变系统的动力学问题进行了相关研究，具体在高速凸轮机构作为周期时变系统的动力学建模、凸轮系统的周期时变模型的线性和非线性的微分方程的求解方法探索和凸轮系统的动态特性分析等方面做了一些工作。

Similar Words：

"凸轮弯曲加工" English translation, "凸轮铣床" English translation, "凸轮铣切装置" English translation, "凸轮系" English translation, "凸轮系4" English translation, "凸轮线图" English translation, "凸轮镶片" English translation, "凸轮箱" English translation, "凸轮箱安装座" English translation, "凸轮箱盖" English translation