| 1. | The wood is full of pits and needs sanding .
这木料上到处是凹坑，需用砂纸打磨一下。 |
| 2. | The small pits that form on the surface act as stress raisers .
在表面形成的小凹坑起到应力增高源的作用。 |
| 3. | Process of crater formation upon electric discharge textured roll surface
毛化轧辊表面凹坑形成过程 |
| 4. | Material removal rate study of wire electrical discharge machining pocketing
线电极放电铣削凹坑的材料去除率规律研究 |
| 5. | The dent is not big enough to be worth hammering out , we can fill it in
这凹坑太小，不值得费事碾平，我们把它填上就可以了。 |
| 6. | Finite element analysis for pits on outer surface of thickwall vessel subjected to internal pressure
内压厚壁容器外壁表面凹坑应力场有限元分析 |
| 7. | With such small pit areas , the number of possible errors in reading the disc is limitless
采用这样小的凹坑区，在读盘中可能出现错误的数量是很多的。 |
| 8. | Good stickiness , good holding ability 、 good clearance of impurity in depression and no incomplete glue
粘性佳、保持力佳、清除凹坑杂质效果佳、不残胶。 |
| 9. | The smallest pits on a dvd are about 0 . 4 microns wide , whereas cd pits have a minimum width of 0 . 83 microns
Dvd上最小的凹坑宽约为0 . 4微米，而cd上的凹坑的最小宽度为0 . 83微米。 |
| 10. | When the cutting plane is passed through the axes of holes or hollows , those features must be drawn as sections
当剖切平面通过回转面形成的孔或凹坑的轴线时，这些结构按剖视绘制，如图所示。 |
