English translation for "前盖板"

front end plate

Example Sentences:

	1.	Replace the front cover . once the tank is full of water , plug in the water heater . turn the switch to " on " and set the temperature dial to the desired setting 重新安装前盖板。等到容器注满水后，将热水器插头插上。将开关拨到" on "的位置打开电源，将温度刻度设置在所需要的温度。
	2.	The operating principle , design method , mading technology , empirical analysis of horn - type longitudinal tonpilz piezoelectric transducer . and . the software of transducer aided design for this type 介绍拥有喇叭型前盖板的纵振tonpilz型压电换能器的工作原理，设计方法，研制工艺和试验分析。
	3.	In the first part , the method of velocity coefficient was used to design a 100mm diameter impeller with five single - arc - cylinder blades , and the method of velocity moment was applied to design the volute " s cross - section . the volute " s cross - section is a rectangle , which was designed as a whole structure with the front shroud of the pump . a special lighting window was designed on the side 在第一部分工作中，设计了一个带半开式叶轮的微型泵：叶轮外径100mm 、共5片单圆弧圆柱形叶片；蜗壳采用速度矩法设计，内为矩形断面，和泵壳前盖板为一整体、透明结构，侧面专门设计一个打光窗口。
	4.	In this paper , based on the navier - stokes equation and the k - turbulent model , the numerical simulation of the 3d turbulent flow in a centrifugal impeller , of which specific speed is 93 . the distribution of the velocity and pressure in the blade - to - blade passage are presented at the design and off - design operating conditions . the simulation results were verifiable with the results measured by piv 本文基于n ? s方程和标准的k ?双方程紊流模型，采用商用cfx - tascflow计算软件对一离心泵叶轮模型进行了叶轮内部三维紊流数值模拟，得到了三个典型工况下、从轮毂到前盖板每一个断面上的速度和压力分布。

Similar Words：

"前概念思考" English translation, "前概型" English translation, "前钙化醇" English translation, "前盖" English translation, "前盖；面盖" English translation, "前盖操纵阀" English translation, "前盖传动机构" English translation, "前盖传动装置液缸" English translation, "前盖开启角" English translation, "前杆口" English translation