English translation for "功率信号"

power signal

Related Translations:

功率:  [物理学] power; rate of work; capacity factor; capacity; activity◇功率比 power rate; power ratio; 功率单位 power unit (p. u.); 功率范围 power bracket; power range; 功率放大 energy amplification; power ampli

Example Sentences:

	1.	It ' s good for reduciing board volume and increasing design speed . the result of actual product tells it can satisfy demand practically 实际的测试和应用表明，该可程控功率信号源可以很好的满足实际应用要求。
	2.	The sound quality would be poor , components would have to be located very close together , the receiver could only pick up strong local broadcast stations , and still more quality issues 音响质量会非常差，部件必须挨得很近，接收器只能接收当地广播电台的强功率信号，还会存在其他质量问题。
	3.	Therefore , when the power level of certain users is significantly high , weak user with conventional matched detector may loose communication . this phenomenon is called near - far effect . conventional matched filter detector cannot mitigate the near - far problem 因此当一些强功率信号用户对弱功率信号用户造成较大干扰，使其无法通信，即存在“远近效应”时，传统的方法无法克服“远近效应”造成的系统性能的下降。
	4.	The method samples the signals of spindle vibration displacement and the spindle electrical machinery power signal using the synchronized sampling technique . as the two kinds of signals are all non - contact pick - ups , this method is very suitable for the machining centre 对加工中心铣刀破损监测，提出了利用主轴振动位移信号和机床主电机功率信号进行监测的方法，由于采用非接触测量，非常适合于加工中心等柔性加工设备。
	5.	This dissertation makes an in - depth analysis of the power signal and the principles of power monitoring . it establishes the mathematicl model of the energy transmitting in the machinery and power system of the machine tool . based on this model , the performance of the spindle electrical machiner - y power signal reproducing the cutting power signal is analyzed 对机床主电机功率信号进行了详细的研究，分析了机床主电机功率监测的原理，建立了机床机电系统能量传输数学模型，通过该模型对机床主电机功率信号跟踪切削功率的性能进行了分析，在此基础上，分析并提出了延迟差分方法，对铣刀刀齿破损进行特征提取。
	6.	Then the de - lay differential method of detecting the milling cutter breakage is put forward according to the above research work and the changing characteristics of power signal and vibration displacement signal when the tool breakage occurs , the monitoring stategy of sensors fusion based on the artificial neural network is put forward . the monitoring system of milling cutter breakage based on the information fusion of the power signal and vibration displace - ment signal has been developed . the diff culty in giving a dectecting threshold due to the changeable character of character of cutting condition has been solved , and a good reliability is ensured over a wide range of conditions 在上述研究工作的基础上，提出了基于人工神经网络用于多传感器信息融合的监测策略，开发研制了以机床主电机功率信号和主轴振动位移信号特征参量融合的铣刀破损监测实验系统，解决了铣削过程中切削条件多变导致监测阈值难以设置的难题，保证了在较宽的工作范围内具有较高的识别准确率。
	7.	By applying dwt and mallat in wavelet analysis , the oscillation signal of active power on transmission line is decomposed and reconstructed ; the strategy of upfc ' s secondary control based on wavelet is proposed by using the reconstructed active power as input signal . simulation results verify the efficiency of damping subsequent swing quickly under serious power oscillation circumstance that is hard to damp by ordinary upfc controller . the system dynamic stability is apparently enhanced 针对系统功率波动频率较高情况下upfc对系统后续摆稳定的控制作用难以得到充分发挥的情况，采用小波分析的mallat塔式算法对系统功率波动信号进行分解，并基于mallat塔式重构算法的思想滤除了信号的冗余扰动成份，寻找到一个高压缩比、低相对误差的重构功率信号，从而使其能够符合upfc实际控制需要。
	8.	It ' s introduced the design method of programed control power signal based on pc / 104 . it ' s adopt the latest technic of direct digital synthesize ( dds ) , at the same time it ' s link the konwledge of electric power , compute , automation together , in order to meets to the power of special testing 设计了基于pc 104架构的可程控功率信号源。采用了最新的技术? ?直接频率合成技术，并结合电力电子、计算机、自动控制等多学科的知识，开发出了满足特种测试需要的可程控功率信号源。

Similar Words：

"功率小的机器" English translation, "功率校正" English translation, "功率校准" English translation, "功率校准试验" English translation, "功率效率" English translation, "功率信号发生器" English translation, "功率信息" English translation, "功率信噪比" English translation, "功率型彩色多普勒" English translation, "功率行波管" English translation