| 1. | Context , and does not resolve dependencies using the load path , as the
上下文中，也不会使用加载路径解析依赖项。 |
| 2. | It is important to design the loading path correctly during the tube hydroforming process
摘要确定合理的加载路径是管件液压成形工艺设计的关键。 |
| 3. | Finally , the test method realizing complex loading paths and its feasibility are analyzed
最后对实现复杂加载路径的实验方法及其可行性进行了分析。 |
| 4. | The cyclic hardening behavior under different loading paths and different load conditions was studied
讨论了材料在不同加载路径及不同工况下的循环硬化特性。 |
| 5. | The results showed that the characteristics of cyclic hardening or softening depend to the strain loading paths and the loading parameters
研究结果表明，低周拉扭疲劳加载下，拉与扭应加响应的硬化与软化特性取决于应变加载路径和加载参数。 |
| 6. | The influences of hollow section ratio on the mechanism of cfdst beams , columns and beam - columns were analyzed . the influences of different loading paths on the bearing capacities of the cfdst beam - columns were also discussed
分析了空心率对轴压、纯弯和压弯构件力学性能的影响,讨论了加载路径对压弯构件承载力的影响。 |
| 7. | An experimental study on concrete - filled steel tubes under bending and torsion is conducted . the experimental stress analysis shows that values of practical critical stress of the steel tube correspond well with mises yielding rule
离心钢管混凝土管在不同弯扭加载路径作用下，其扭矩与转角的关系在各阶段特点趋势与纯扭转作用下的情况基本相似。 |
| 8. | In this paper , the main recent developments of loading path optimization methods for tube hydroforming process are analyzed , and the difficulties in determining the optimal loading path between different methods are compared , some future developments about it are also discussed
文章较为系统地介绍了管件液压成形中加载路径的优化设计方法，比较分析了各种方法的优缺点与适用对象，讨论了研究过程中存在的主要问题和研究的发展方向。 |
| 9. | In order to accurately describe the strain - controlled cyclic deformation of material at high temperatures , an experimental research was carried out on the cyclic deformation of 304 stainless steel subjected to uni - axial and non - proportionally multi - axial cyclic straining at 350 and 700
摘要为了对材料的高温应变循环变形行为进行精确的本构描述，在350和700下，对304不锈钢在不同加载路径下的单轴和非比例多轴应变循环变形行为进行了实验研究。 |
| 10. | On the basis of expounding the effects of plastic deformation behavior and forming limit on the analysis of sheet metal forming , this paper overviews the research progress on yield criterion , hardening model , forming limit and effects of complex loading paths , and obtains that establishing the test method of complex loading paths according with sheet forming characteristics , verifying the accuracy and applicability of theoretical results , and determining the analytic description and practical criterion under complex loading paths , are main research directions in sheet metal forming
摘要本文在阐述塑性变形行为与成形极限对于解析板料成形过程的作用与意义的基础上，针对板料屈服准则、强化模型、成形极限及复杂加载路径的影响规律的研究进展进行了综述与分析，得出：建立符合实际板料成形特点的复杂加载路径的实验方法，验证理论研究结果的准确程度及适用范围，确定复杂加载路径下的解析描述及实用判据，是目前该领域主要的研究方向。 |
