| 1. | Moving - scale instrument
动标度尺式仪表 |
| 2. | Marks identity columns using not for replication to enable manual identity range handling
使用not for replication标记标识列，启用手动标识范围处理。 |
| 3. | For more information , see the section " assigning ranges for manual identity range management " in the topic
主题中的“为手动标识范围管理分配范围”部分。 |
| 4. | Manual marks the identity column using not for replication to enable manual identity range handling
使用not for replication标记标识列，以启用手动标识范围处理。 |
| 5. | Olap cubes frequently contain so many members and dimensions that it can be difficult to manually identify the patterns that the cubes contain
Olap多维数据集通常包含如此多的成员和维度，以致于很难手动标识维数据集包含的模式。 |
| 6. | 5 . the methods of temperature - correcting on copper cylinders and copper spheres are discussed . the method of unitive temperature - correcting on plastic pressue - measuring elements is put forward for the first time . large quantities of quasi - dynamic calibration tests in different temperatures are carried out on the dropper - hammer hydraulic dynamic pressure calibration device and the unitive temperature - correcting formula which accords with the traditional correcting method is got
在落锤液压动标装置上组织了多批次的铜柱、铜球高低温准动态校准试验，探讨了建立温度误差统一修正公式的可行性，建立了测压铜球，测压铜柱符合我国传统修正方法的温度统一误差修正公式。 |
| 7. | 6 . since the monitor precision of quasi - dynamic calibration system is very important , the model of the four channel electric pressure - measuring system in frequency domain is built up . the cause of variance is analyzed . the error function of the system is defined and the formula of correcting the system error is derived
6由于落锤液压动标装置校准系统的校准压力监测精度极为重要，本文对四路电测压力系统进行频域建模，分析了产生不一致的原因，定义了系统的误差函数及推导了统一误差模型的修正公式。 |
| 8. | 3 . a series of quasi - dynamic calibration tests by varying the pressure pulse width for the < t > 3 . 5 x 8 . 75mm pillar copper cylinders and o 4 . 763mm copper spheres are done on the dropper - hammer hydraulic dynamic pressure calibration device . by means of data analysis , the regulations of pulse width ' s effect on the two types of plastic pressure - measuring elements are obtained
3利用落锤液压动标装置组织了3 . 5 8 . 75mm柱形铜柱、 4 . 763mm铜球的变脉宽准动态校准试验，通过试验数据处理，获得了两种型号塑性测压器件的脉宽影响规律。 |
