| 1. | Heating curve determinaiton apparatus
升温曲线测定仪 |
| 2. | Heating curve determination
升温曲线测定 |
| 3. | Chinese current code for fire resistance adopts the method of adjustment by experiment
我国现行的防火设计规范采用的是基于标准升温曲线实验校核法。 |
| 4. | And the experimentation has been done . it ' s primary results were given , such as temperature and pressure curve for the combustor and gasifier
并进行了多联产方案试验，给出了燃烧炉、气化炉的升温曲线、床层压降曲线等初步试验结果。 |
| 5. | In this thesis , behaviors of unbonded prestressed concrete slabs including 4 simply - supported slabs and 9 continuous slabs are investigated under fire , based on the elevated temperature curve accord to the iso standard fire curve
本文采用标准升温曲线，对4块简支板及9块连续板分别进行了火灾行为的试验研究。 |
| 6. | These specimens were heated following as closely as possible the iso - 834 standard fire curve or the standard fire curve prescribed by the regulation of gb / t 9978 - 1999 ( structural member fire - resistant experimental method )
试件的升温按国际标准化委员会标准iso - 834和我国《 gb / t9978 - 1999建筑结构耐火试验方法》所规定的建筑火灾标准升温曲线进行。 |
| 7. | Abstract : the esterification of phthalic acid and ethylene glycol under microwave field was studied . the results showed that it could get high yield of product and need less fime to complete the reaction
文摘:观测了邻苯二甲酸及乙二醇在微波辐照下的升温曲线，并研究了邻苯二甲酸和乙二醇在微波辐照下的酯化反应，结果表明，微波辐照下的酯化反应行为优于常规条件（电炉加热）下的酯化反应行为。 |
| 8. | The furnace for the test is the oil - burner that is designed and produced by ourselves . the whole test process is undertaken in the modeled standard temperature curve . the result of the test demonstrates that the properties of the furnace are stable and convenient for use
火灾试验使用的试验炉为自行研制的燃油火灾试验炉，全部的试验是在模拟标准升温曲线的基础上进行的，试验结果表明炉子性能稳定、使用方便。 |
| 9. | Abstract : heating curves of billet for heavy rail in reheating furnace are measured by use of dragging coupling methods . effects of fuel consumption , furnace temperature and heating time on billet temperature are studied and current thermal schedule of reheating furnace is evaluated , which provides the basis for optimizing and improving thermal schedule of reheating furnace
文摘:运用拖偶法测量了重轨钢坯在轨梁加热炉内的升温曲线，分析了燃料消耗、炉温与加热时间对钢坯温度的影响，评价了现行的加热炉热工制度，为优化、完善加热炉热工制度提供了依据。 |
| 10. | We select ni / cr alloy resistor as element together with ceramic embedding hearth ; select small flat - and - disc heat - even hubby ceramic sample holder , select ni / cr & ni / si thermoelectric couple ( type k ) as thermoscope with threads 0 . 5 mm in diameter which is installed in the middle of the holders symmetrically ; select aluminum silicate fire - retardant fiber as materials for heat preservation ; design some hardware , for example temperature controller & transporter , signal amplifier etc ; design controlling curve to heat stove ; and introduce the method of least squares nonlinear regression and subsection function to deal with data . in order to obtain the reasonable operation conditions and operation curve , we have also done many theory analysis and experiment discussions
通过理论和试验探讨，选用镍铬合金电阻丝作为加热元件，配以陶瓷质埋入式炉膛；选用陶瓷质小尺寸扁平?圆盘均热块体型样品支持器；选用0 . 5mm丝径镍铬?镍硅热电偶( k )作为测温元件；热电偶对称安置在样品支持器容器的中部；选用硅酸铝耐火纤维作保温材料；合理选用和设计了温度控制器、温度变送器、信号放大电路等硬件；采用升温曲线来控制炉膛供热过程；采用最小二乘法非线性回归与分段函数相结合的曲线模拟方法，进行图形处理。 |
