| 1. | Generally the components of the signal that are in phase and out of phase with the primary signal are plotted separately .
一般都分别划出与原始信号同相和异相的信号分量。 |
| 2. | The method is found to achieve good effect and can specify characteristics of the testing signals by lesser dimension
该方法能以较小的特征维数表征原始信号特点。 |
| 3. | The information of singularity points can be reserved well and the de - noised signal is a good estimation of the original signal
该方法在去噪的同时，能有效地保留信号的奇异点的信息，是原始信号的一个非常好的估计。 |
| 4. | Dvi signal is a kind of digitalized vga signal that has been used by computer monitor , image controller , lcd , dlp , pdp . . . . .
Dvi信号是将vga信号r g b h v数字化的新一种媒体信号，可以保证原始信号无失真地到达显示设备。 . |
| 5. | Using the embedded coding algorithm , an encode can terminate the encoding at any point without much distortion , which is suitable for real time processing
在编解码过程中数据流根据重要性依次排列，在任一点停止编解码仍然能够重构出原始信号，适合于实时处理。 |
| 6. | The usual way to solve this problem is to transform the original signal into " 0 " , " 1 " equally - distributing circuitry code type which is fit for the optical channel , and then transmit
解决该问题常用的方法是通过信道编码将原始信号变换为“ 0 ”和“ 1 ”均匀分布的适合光线信道传输的线路码型，再送入光路进行传输。 |
| 7. | In another simulation experiment the time series simulated by program conforming simiu spectrum was used as target signals . the results showed high correlation between the measured velocities and the target signals
本文利用simiu谱的模拟风速序列进行了风洞实验，结果表明原始信号与实验风速信号具有很好的相关性。 |
| 8. | The dissertation investigated the problem for simulation of sar raw signal , focusing on the terrain - echo simulation and imaging algorithm . large quantities of raw data which leads to valuable conclusion has been made
本文围绕sar原始信号仿真展开研究，讨论模拟合成孔径雷达地面回波的产生和成像算法，生成回波数据，得到满意的成像结果。 |
| 9. | Complete the bi - directional data communication between the hardware and the microcomputer . ( 3 ) design the cpld ( complex programable logic device ) processing circuit to preprocess the initial signal in the data acquisition module
( 3 )下位机采集模块部分,在一块cpld ( complexprogramablelogicdevice )集成芯片上烧写了设计的电路,能够对输入原始信号进行预处理。 |
| 10. | Generally , the information that provided by the original ultrasonic signals is too limited to meet the demand of wave analysis and characteristics identification . therefore , these signals need to be further processed and transacted
一般来说，简单的超声波原始信号能够提供的信息是有限的，远不能满足声波分析与特征识别的需要，须对其进行一定的加工与处理。 |
