| 1. | For some time it has been the practice to install both multitank and single-vessel reaction units outdoors .
有时把多槽和单槽反应装置装设在室外。 |
| 2. | Current sensing device
电流反应装置 |
| 3. | But the researchers at pennsylvania state university were able to get around these problems by chemically modifying elements of the reactor
但是，宾夕法尼亚州州立大学的研究者们修改了反应装置的化学方面的因素从而绕过了这些问题。 |
| 4. | 2 . the rigorous thermodynamic model has been applied to study the characteristics of cryogenic distillation column having feedback stream with hydrogen isotope system in steady state
2 、应用严格的热力学模型研究了带有侧线循环及平衡反应装置的氢同位素低温精馏塔的稳态分离特性。 |
| 5. | In laboratory experiments , their reactor generated hydrogen gas at nearly 99 percent of the theoretical maximum yield using aetic acid , a common dead - end product of glucose fermentation
在实验室的实验中，研究者们的反应装置利用醋酸产生的氢气量达到理想情况下的99 % 。醋酸是常见的葡萄糖发酵后的最终生成物。 |
| 6. | This pump is of jet pump with circulating water asworking liquid and designed by negative pressure produced from spraying liqunid . it is ar new vacuumair pump , which can provide with circulating cooling water to the reaction of device at same time
该泵是以循环水为工作流体，采用射流技术产生负压而设计的一种新型真空抽气泵，它不仅是一种真空抽气装置，同时还能向反应装置中提供循环冷却水，该泵具有不用油、无污染、耐腐蚀、噪音低、方便灵活等特点。 |
| 7. | The single function of biological reaction filler had been applied widely , which merely supplied the reaction place and the large amounts of microbe for biological reactor , though it had the large specific area and the surface character suitable for conglutinating microbe
目前应用的生物反应填料作用单一，只是通过较大的比表面积和宜于生物附著的表面性质，为生物反应装置提供较高的生物量及为生物反应提供场所，但不能为生物反应装置创造良好的传质扩散条件。 |
| 8. | In the thermal fusion device , the materials of the plasma facing components are expected to have high thermal resistance and outstanding heat conductivity . using a single kind of material , however , can not meet the above two requirements at one time . therefore , the joining technique is regarded as a proper approach to improve the properties of the conventional materials
在热核聚变反应装置中关键结构件“面向等离子体”元件要求材料具备良好的耐高温性和导热性,而现有的单一材料不能同时满足该要求,因此,通过连接技术将现有材料进行改善是合适的。 |
| 9. | The etching reactor is developed to obtain reproducible tapers of desired diameter and length . an approach for on - line monitoring of etching using the power meter is demonstrated . based on the experimental data , the relationship between the leak - out optical power and change of time and also that between the leak - out power and width of the remaining width of cladding , and the fiber length exposed to hf acid are summarized
本文对氢氟酸腐蚀法制作光纤耦合器的反应装置和实验系统进行了设计,介绍了具体的实验过程及其注意事项,通过对实验结果进行分析总结,得出泄漏光功率随腐蚀时间的变化关系以及泄漏光功率与包层剩余厚度和腐蚀长度的关系。 |
