English translation for "变形抗力"
|
- deformation resistance
distortion resistance
resistance of deformation
resistance to deformation
Related Translations:
变形: 1.(形状、格式起变化) be out of shape; become deformed; transshape; transfiguration; transformation; variant; transmogrification; modification : 自行车的前轮变形了。 the front wheel of the bicycle was out of
- Example Sentences:
| 1. | Experimental study of deformation resistance of trip800 steel
800钢变形抗力的试验研究 | | 2. | However , the poor ductility and strong resistance to deformation at elevated temperature currently limit their application
但这类材料的塑性差、高温变形抗力大,使其难以加工成形,阻碍了其实用化。 | | 3. | The model of the deformation resistance of weathering steel is calculated by measured value and it has higher fitting precision
用实测值回归出了耐候钢的新型变形抗力模型，而且该模型具有较高的拟合精度。 | | 4. | However , their application is currently limited by the poor ductility and strong resistance to deformation at elevated temperature
但这类材料的塑性差、高温变形抗力大,使其难以加工成形,阻碍了其实用化。 | | 5. | The results show that the deformation resistance is affected remarkably by both strain rate and deformation temperature , the deformation resistance decreases with the increase of temperature , and it increases with the increase of strain rate
结果表明：变形温度和应变速率对耐候钢变形抗力的影响最强烈；耐候钢的变形抗力随变形温度的升高而下降，随应变速率的提高而增大。 | | 6. | It also simulated the influence and relationship in the transfiguration resisting force , coefficient of he transfiguration resisting force , rolling area , rolling temperature , rolling pressure , loop length , the transition between loop length and loop high
模拟仿真出了变形抗力、接触面积、温度、轧制压力、活套套量、活套套量与套高转换等各个模型之间的相互影响。 | | 7. | The deformation resistance of the weathering steel during hot deformation has been studied using mms100 - simulator , and the relationship among deformation temperature , strain rate , degree of deformation and deformation resistance has been determined
摘要通过在mms100 - simulator热力模拟实验机上的热压缩实验，研究了不同热变形条件下耐候钢的变形抗力，考察了变形温度、应变速率及变形程度与变形抗力之间的关系。 | | 8. | The possible factors including the deviation of temperature in length and breadth of rod , the changes of transfiguration resisting force under the changes of temperature , the adjustment of roll gap , the variation of rolling pressure , the changes of roller speed during dynamic adjusting press , the unmatched of seconds - flux under the dimension fluctuation of the coming sample and so on . the whole system was a closed loop which factors in it interacts each other
可能的影响因素有:沿轧件纵横向温度变化、由温度引起的轧件变形抗力变化、轧机辊缝值变化、负载变化、电机调节系统由不稳定向稳定过渡过程中轧辊转速的变化(如咬钢过程中的动态速降后的回复阶段) 、来料尺寸波动造成秒流量不匹配等,整个仿真系统是各个因素相互影响关联的一个闭环系统。 |
- Similar Words：
- "变形菌纲，组成着色菌目" English translation, "变形菌落" English translation, "变形菌门" English translation, "变形菌族" English translation, "变形开裂" English translation, "变形拷贝" English translation, "变形课" English translation, "变形空罐整形机" English translation, "变形恐怖" English translation, "变形孔隙介质" English translation
|
|
|
