| 1. | The principle of measuring sensor for rotating blade vibration
旋转叶片振动测量传感器的设计 |
| 2. | Temperature effect on vibration frequency of aero - engine compressor blade
航空发动机压气机叶片振动频率与温度的关系 |
| 3. | Turbine bucket vibration
涡轮机叶片振动 |
| 4. | Turbine blade vibration
涡轮机叶片振动 |
| 5. | The thesis studied the effect of the different crack on crack blade vibration characteristics
研究了裂纹叶片不同位置、尺寸的裂纹对叶片振动特性的影响。 |
| 6. | At last , the tie wire was added to the damped blade , numerical result shows it can decrease blade response further
最后分析添加整圈松拉金结构的叶片振动响应，发现松拉金的加入将进一步降低叶片振动响应值。 |
| 7. | Moreover the study of the dynamically response of the blade vibration behavior depending on mass , stiffness and aerodynamics is made
又从质量、刚度、气动力的角度出发，研究该风力机叶片振动的动态响应。 |
| 8. | Based on the computational fluid dynamics and structural dynamics methods , a numerical analysis system for the blade flutter in turbomachinery was established
在此基础上，结合叶片振动结构动力学分析，初步建立了相对完整的叶片颤振数值分析系统。 |
| 9. | It is right that the modal of discontinuous phase method measures blade vibration parameters and the monitoring system has a good perspective in engineering application
结果证明间断相位法的计算模型是正确的，研制的叶片振动状态监测系统有良好的应用前景。 |
| 10. | Through processing vibration signal of the damaged blade , it can be seen that the different depth and location splits have the different influences to the vibration character of the blade
通过小波分析处理不同损伤程度的叶片振动信号，总结分析了不同深度和位置的裂纹对叶片振动特性的影响。 |
