English translation for "吸能结构"

energy-absorbing structure

Example Sentences:

	1.	Improvement design of minibus ' s frame structure in frontal impact 轻型客车正面碰撞车架吸能结构优化设计
	2.	Once collision accident occurred when the train is moving with fairly high speed , the energy - absorbing structure produces large plastic deformation along the direction needed to absorb sufficient energy , at the same time , the deceleration must be controlled within the endurable limits to human body 当列车在正常运行时，车体有足够的强度和刚度，需要满足有关规范规定的强度、刚度要求；在较高速下发生碰撞事故时，吸能结构能够沿所需方向产生塑性大变形吸收足够冲击动能，保证机器间和乘客区不发生破坏，并延缓碰撞作用时间，降低碰撞瞬间最大减速度，使撞击减速度在人体承受范围内。
	3.	In order to reduce the losses suffered from collision between passenger trains , a new design method for the car body structure of motor car and trailer is advanced . car body structures are made up of three parts with diffferen tstiffness , by carefully designed . the parts of the front and the end are the wea kstiffness structure to absorb energy through plastic deformation in the collision . the middle part , where only elastic deformation occurs , is an elastic deformati on structure with strong stiffness . as the passenger train runs normally , car body structure measure up to regulation of intensity and stiffness in the standards 为了减轻客运列车碰撞事故造成的损失，实现被动安全保护，对组成列车的动车、客车车体结构提出了新的设计方法，重新分配车体各部分刚度，设计出具有合适吸能结构的耐冲击车体，车体结构均按前、中、后三种纵向刚度设置，前后两部分为可以产生塑性变形的弱刚度吸能结构，中间部分为仅产生弹性变形的强刚度弹变结构。
	4.	Abstract : in order to reduce the losses suffered from collision between passenger trains , a new design method for the car body structure of motor car and trailer is advanced . car body structures are made up of three parts with diffferen tstiffness , by carefully designed . the parts of the front and the end are the wea kstiffness structure to absorb energy through plastic deformation in the collision . the middle part , where only elastic deformation occurs , is an elastic deformati on structure with strong stiffness . as the passenger train runs normally , car body structure measure up to regulation of intensity and stiffness in the standards 文摘:为了减轻客运列车碰撞事故造成的损失，实现被动安全保护，对组成列车的动车、客车车体结构提出了新的设计方法，重新分配车体各部分刚度，设计出具有合适吸能结构的耐冲击车体，车体结构均按前、中、后三种纵向刚度设置，前后两部分为可以产生塑性变形的弱刚度吸能结构，中间部分为仅产生弹性变形的强刚度弹变结构。

Similar Words：

"吸能" English translation, "吸能代谢反应" English translation, "吸能的" English translation, "吸能反应" English translation, "吸能过程" English translation, "吸能泡沫塑料" English translation, "吸能碰垫" English translation, "吸能器" English translation, "吸能式保险杆" English translation, "吸能式转向管柱" English translation