Mobile
Log In Sign Up
Home > chinese-english > "喷管长度" in English

English translation for "喷管长度"

nozzle length

Related Translations:
涡轮喷管:  turbine nozzle
低速喷管:  slow running jet tubeslow-running jet tube
铰接式喷管:  hinged nozzle
喷管端点:  end of the nozzle point
喷管倾斜:  cant of the jet
可变喷管:  variable nozzle
膨胀喷管:  expansion nozzle
喷管根部:  nozzle-end
反向喷管:  reversal nozzle
喷管架:  nozzle tube yoke
Example Sentences:
1.The emphasis on the minimum nozzle length was carried to the limit with the design of nozzle with sharpedged throats .
强调最小喷管长度转向采用锐边喉管道的喷管设计的极限值。
2.Study on gas - solid two - phase flow in laval nozzle and laval nozzle length
缩放喷管内的气固两相流动和缩放喷管长度的研究
3.By increasing the length of laval nozzle , an approach was presented to obtain higher particle velocity necessary for gas - solid separation in dusty gas of high temperature and high pressure
提出了用增加缩放喷管长度的方法,使含尘高温高压气体中的灰尘颗粒获得实现气固两相分离所必需的更高动量的途迳。
4.The ssl - mln design method of nozzle symmetry part is improved and optimized . in the improved method , arc transition is adopted in the throat , as a result , the quality of flow field is improved and the length of nozzle is minimized
对喷管对称段的ssl - mln设计方法进行了改进和优化;改进的设计方法中,吼部采用圆弧过度,改善了流场品质,同时喷管长度小。
5.Based on one dimension flow theory and lagrange method , the correlation of speeding rate of particles under gas flow drag with the size of particles and the length of laval nozzle used for the gas and solid two - phase separation test apparatus was studied
摘要采用一元流动理论和拉格朗日方法,研究了用于气、固两相分离试验装置的缩放喷管内,被气流拖曳的颗粒加速率与颗粒大小和缩放喷管长度的关系。
6.It is shown that with the decrease in size of particles , their velocity at the exit of laval nozzle increases under the conditions of both the invariable gas parameters and the same laval nozzle length ; the laval nozzle length increases with the size of particles under the same speeding rate of particles
研究表明,在气流参数和缩放喷管长度不变的情况下,被气流拖曳的颗粒越大,颗粒在缩放喷管出口处的速度就越低;在颗粒加速率相同的情况下,颗粒越大,所需的喷管长度就越长。
7.Secondly , the cfd method is used to study the flowfields in the laser chamber and the loss of the total pressure in several types of nozzles . the answer shows that reducing the length of the nozzles and the high of the throats in the nozzles can reducing the loss of the total pressure . and the answer also shows that the small nozzles with helium injected in the base region are good for laser chamber pressure recovery
其次,本文利用cfd技术模拟了光腔流场,研究了几种喷管的总压损失特性。研究结果表明,对于平面对称喷管,减小喷管长度,增加喉道高度有利于减少总压的损失。用cfd技术对光腔段的模拟表明,采用小尺寸喷管,并且在基区大量注入氦气有利于激光器压力恢复。
Similar Words:
"喷管边缘" English translation, "喷管表面" English translation, "喷管操纵套筒" English translation, "喷管操纵系统" English translation, "喷管操纵装置压力" English translation, "喷管衬垫" English translation, "喷管衬套" English translation, "喷管衬套材料" English translation, "喷管出口" English translation, "喷管出口动量" English translation