English translation for "圆弧插补"
|
- circular interpolation
Related Translations:
逆时针圆弧: counterclockwise arc 圆弧形: circular arc 短语和例子这些树的枝叶成圆弧形, 遮覆河上。 the trees arched over the river 圆弧滑动: circular slidecircular sliprotational slide
- Example Sentences:
| 1. | Improving method for time dividing arc interpolation
时间分割圆弧插补改进算法 | | 2. | A new method for obtaining points from plane curve interpolating by arc
一种新的平面曲线圆弧插补节点获取方法 | | 3. | Combined with ac servo motor of panasonic company and encoder , line and circle interpolation is realized
结合松下公司的交流伺服电机及配套的驱动器和光电码盘，搭建，驱动实现直线、圆弧插补。 | | 4. | Here , three methods are presented : shortening compensation , extending compensation and insertion compensation . this thesis also puts forward an improved dda arc interpolation algorithm , which decreases the radial deviation of the traditional algorithm without losing the original advantages
改进的dda圆弧插补算法继承了传统dda圆弧插补算法不含超越函数的优点，减少了传统dda圆弧插补算法的径向误差，实现了内外均差弦线插补。 | | 5. | The paper had analyzed the foundation of mathematic model of interpolation , introduced time - divided method to accomplish the operation of interpolation , by the pcl - 832 servo control card , the movement is controlled , which makes the ac servo motor to work
本文从插补算法数学模型的建立入手，采用时间分割法进行插补运算，并建立了直线插补算法和圆弧插补算法的数学模型，通过pcl - 832控制卡实现插补运动的控制，完成了对交流伺服电机的驱动。 | | 6. | In this process , the thesis discusses detailedly the method which can improve the resolving power in measuring component and can deal with the probe circuit , and puts forward the design method of applied circuit . then the thesis discusses the methods of line and circle interpretation
接着又讨论了计算机数控系统的控制策略，主要包括：知道预定轨迹的直线与圆弧插补的方法、连续扫描系统的控制策略、 pid调节器的设计及pid参数的整定方法等。 | | 7. | Furthermore , for confirming correctness and superiority of the least windage method which the system adopts , the paper achieves line and circle ' s imitation charts about every instance by simulating possible instances in existence in course of interpolating practically using matlab6 . 1 software , and . compared with one by one compared method , we come to the conclusion that the least windage method has quicker velocity and less error
此外，为了验证本系统所采用的最小偏差法的正确性和优越性，运用matlab6 . 1软件对实际插补过程中可能遇到的各种情况进行了仿真，给出了直线和圆弧插补在各种情况下的仿真图，并同逐点比较法进行了比较，得出插补算法具有速度快、误差小等优点。 | | 8. | It builds a relative coordinates based on the jumping - off point of circular interpolation as its origin , caculates the sine and cosine of the angle formed by x axis and the line which connects the origin and the centre of the circle , then gets the coordinates of the centre in the relative coordinates , and enduces a uniform fomula , which is easy to program in computer
摘要用圆弧插补起点作为相对坐标系原点，连接圆弧起点和圆心，求出该连接线和相对坐标x轴的夹角的正余弦值，由此解出圆心在相对坐标系的坐标，并得到一个统一的计算公式，易于计算机编程实现。 | | 9. | At the same time basic ideas of building the 5638 ? interpolation library were proposed on the basis of the windows nt dynamic link library standards . the interface between the interpolation routines and user mode applications was defined . then the flow design of the routines , which implement the straight line and circle interpolation , was accomplished
本文还依据windowsnt动态连接库的规范提出了设计其插补函数库的基本思路，定义了插补函数与用户态程序之间的接口，并完成了直线和圆弧插补函数的流程设计。 |
- Similar Words：
- "圆弧" English translation, "圆弧半径" English translation, "圆弧背面" English translation, "圆弧标度尺" English translation, "圆弧测定器" English translation, "圆弧插值法" English translation, "圆弧车刀" English translation, "圆弧齿" English translation, "圆弧齿厚" English translation, "圆弧齿廓" English translation
|
|
|
