| 1. | Pertaining to a particular type of code or punched card utilizing12 - rows per column and usually80 - olumns per card
用于说明一种每列12个孔位、每张卡片通常有80列的穿孔卡或一种特别类型的代码。 |
| 2. | Strict control is maintained on every single detail , including color , perforations , edge cutting and the embossed marking
每一个颜色，每个孔位，每一条切边，每个压痕，每个细节的处理，都一丝不苟，力求精美。 |
| 3. | 3 a set of front - mounted adjustable columns on drill frame is used for adjusting height of mast front - end , which makes it easy to align with hole site
3钻机机架前部设有上下调节立柱及哈夫,可调节桅杆高低国家专利： zl02264791 . 0 ，施工时对孔位快捷方便。 |
| 4. | Position the bores according to the product . drill 6 bores respectively with impact driller , after the center line for bolt bore is drawn in the appropriate position on the wall
根据产品安装孔位，在墙面相应位置画出螺钉孔中心线后，用冲击钻分别钻6孔。 |
| 5. | A . position the bores according to the product . drill 6 bores respectively with impact driller , after the center line for bolt bore is drawn in the appropriate position on the wall
根据产品安装孔位，在墙面相应位置画出螺钉孔中心线后，用冲击钻分别钻6孔。 |
| 6. | 3 a set of front - mounted adjustable columns on drill frame is used for adjusting the height of mast front - end , which makes it convenient to align with hole site
3钻机机架前部设有上下调节立柱及哈夫，可调节桅杆高低国家专利： zl02264791 . 0 ，施工时对孔位快捷方便。 |
| 7. | 3 a set of front - mounted adjustable columns on drill frame is used for adjusting the height of mast front - end , which makes it convenient to align with working position
3钻机机架前部设有上下调节立柱及哈夫,可调节桅杆高低国家专利： zl02264791 . 0 ，施工时对孔位快捷方便。 |
| 8. | The shm ( single hole microblowing ) as a new perturbation active control technique has been applied to the slender body with different model noses at zero sideslip and high angle of attack
摘要在亚临界流动范围内，对具有不同头部形状的尖拱形细长旋成体在无侧滑大迎角下进行单孔位微吹气扰动控制实验。 |
| 9. | The analyses indicate that the shm ' s control ability has strong adaptability to various slender body at high angles of attack , and its control ability is determined by the original state of the flowfield around the slender body
实验分析表明，单孔位微吹气扰动这一大迎角非对称控制手段具有较强的适应能力，其控制能力的大小则由该头部形状的初始状态决定。 |
| 10. | Fibre optic interconnecting devices and passive components - basic test and measurement procedures - examinations and measurements - measurement method for the hole location of a multiway connector plug - section 27 : measurement method for the hole location of a multiway connector plug
纤维光学互连器件和无源元件.基本试验和测量程序.检查和测量.多路连接器插头的孔位测量 |
