| 1. | Properties of isotropical conductive adhesives filled with carbon nanotubes
填充碳纳米管各向同性导电胶的性能 |
| 2. | Connecting method : rubber connector
导电胶条连接 |
| 3. | 5 connection : silicon rubber sheet , heat seal connector , clip terminal , tab and cog etc
- 5连接方式：导电胶条斑马纸金属插脚tab cog等。 |
| 4. | So the conductive adhesive must be cured fully and sealed cap is carried out under the low temperature as possible
说明导电胶应充分固化，尽可能在较低的温度下进行封盖。 |
| 5. | Compression - type connector where current flows between the lcd panel and the electronics of the printed circuit board through a rubber connector
使用此种连接方式时需要用一结构件将lcd与导电胶条和pcb版固定在一起 |
| 6. | It is confirmed that bonding degradation ( which is common in domestic microwave ciruits ) is responsible for the failure of the generator
分析结果表明，失效原因是导电胶粘接导致的键合失效，这也是目前国内微波模块中最常见的失效原因之一。 |
| 7. | The unstability for steam content in the sealed devices is described , it mainly results from water vapor decomposed by bonding material of conductive adhesive under high temperature
摘要简述了集成电路陶瓷封装内部水汽含量的不稳定性，主要是由粘接材料导电胶在高温下分解释放出的水汽所造成的。 |
| 8. | The concrete product type are the bakelite , the tire , the electric conduction black grain and the electric conduction printing ink and so on , we had developed several hundred types of specification in our product
具体的产品种类有导电胶、导电片、导电黑粒和导电油墨等，各种规格的产品已达数百种之多。 |
| 9. | Through all these work , a practical method for designing test structure , setting up automatic measurement system , collecting test data , and dealing with statistical data was given
对于导电胶可靠性的评估，从试验样品设计、自动测量系统和测量方法直到可靠性试验数据的处理和统计分析，提供了一套切实可行的方法。 |
| 10. | In order to prepare ag - coated flake graphite used as filler of conductive adhesive or poles of the battery , the electroless plating procedure was investigated that plated the silver directly in alkaline solution without activation or sensitize treatment
摘要为制备可用于高性能电池电极和导电胶的石墨填料，采用了不经过敏化、活化处理而直接在碱性镀液中进行化学镀银的方法制备了镀银鳞片石墨。 |
